Apparently the struggle to remove the PTO pulley and bearing on my 184 has killed the PTO clutch. It will not engage even with a jumper.
It appears to have a 5/16 retainer bolt and tapered and keyed hub. I was told to remove this bolt, and the hub is threaded
internally for a larger bolt (5/8). Screw in this bolt, with a spacer, and it will break the taper and push the hub off.
Anybody else done it this way, or have a better way?
Anybody have a used one? New is gold at $400!! Who makes them?
Thanks!!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
184 LoBoy PTO clutch removal?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
184 LoBoy PTO clutch removal?
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
-
- 5+ Years
- Posts: 254
- Joined: Tue Jul 29, 2014 4:16 pm
- Zip Code: 45325
- Tractors Owned: IH 184
- Location: Farmersville ohio
Re: 184 LoBoy PTO clutch removal?
Have you measured the coill resistance?
-
- 10+ Years
- Posts: 2784
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 184 LoBoy PTO clutch removal?
Sorry, I haven't had mine out yet. The most I have done with it is replace the belts and the idler pulley bearing (tensioner)
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
Re: 184 LoBoy PTO clutch removal?
@LarryB
Where is that checked from? Between the two spades on the plug?
Where is that checked from? Between the two spades on the plug?
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
-
- 10+ Years
- Posts: 2784
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: 184 LoBoy PTO clutch removal?
Yes, it would be measured across the two spades (when disconnected)
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 6 guests