To date I have purchased both styles of PTO Reducer / Reverser for my tractor. Neither would line up with the bolt pattern from the mounting plates.
I now suspect the cast iron style I purchased may have been for a cadet, but alas the bolt pattern would not fit up and I don't want to drill cast iron.
The white one is meant to go on a cub and I used it as a template for a new bracket. Here it is hanging on my 184.
So I took this to JAS Steel near Imlay City, MI and they made a new bracket following this template. They punched a hole for the PTO and put the bends into it.
I brought it home with no holes for the mounting and drilled these myself.
Here it is mounted on the tractor. Works Great!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hub City PTO Reducer/Reverser on 184
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Hub City PTO Reducer/Reverser on 184
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Hub City PTO Reducer/Reverser on 184
Finally. I am ready to rent a standard post hole digger, or run a corn grinder, or whatever small 540 RPM implement is available.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Hub City PTO Reducer/Reverser on 184
Looking at that second picture, I’m betting that the bracket is supposed to be mounted on the other side of the reducer when mounting to a cub.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Hub City PTO Reducer/Reverser on 184
Will this overload the pto system if your using the six spline reverser attachments?
I would use the six spline clutch on the reducer/reverser just Incase.
I would use the six spline clutch on the reducer/reverser just Incase.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Hub City PTO Reducer/Reverser on 184
There of course are horsepower and torque limitations on a cub or numbered series. I doubt the gearbox devours much hp. It clicks on and off easily.
My hopes are to run implements like post hole diggers, corn grinder, maybe a hay elevator. Low hp applications. I already have a tiller and of course a mower deck, so this just adds to the versatility of the lowboy.
My hopes are to run implements like post hole diggers, corn grinder, maybe a hay elevator. Low hp applications. I already have a tiller and of course a mower deck, so this just adds to the versatility of the lowboy.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Hub City PTO Reducer/Reverser on 184
The number tractors can do what ever a fcub can do I’m sure. The gear box can take it im saying a clutch maybe needed to take some pressure off the pto drive train.
I’ve had some violent lock ups with my 154/3260 mower deck with sticks and rocks I didn’t see in the tall grass.
I’ve had some violent lock ups with my 154/3260 mower deck with sticks and rocks I didn’t see in the tall grass.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
Re: Hub City PTO Reducer/Reverser on 184
That's very nice!
Is the one not used for sale?
Is the one not used for sale?
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Hub City PTO Reducer/Reverser on 184
The white one and its bracket has been sold to another forum member. The red one and the new bracket is is staying with the tractor for a while.
I would be willing to part with the cast mount as this doesn't fit the 184. I'm guessing it fits a Cub Cadet, but am not certain.
I would be willing to part with the cast mount as this doesn't fit the 184. I'm guessing it fits a Cub Cadet, but am not certain.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
Re: Hub City PTO Reducer/Reverser on 184
Thank you anyway. Looking for a 6 spline reducer.
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests