This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
International 184
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
treeman53
- Posts: 25
- Joined: Sun Sep 15, 2019 11:02 am
- Zip Code: 16417
International 184
Where can I get a carb kit for the original IH carburetor? I bought a Zenith kit awhile back, made the gasket fit, but now, it won't run without full choke. It ran good for awhile, but I'm guessing that weird fitting gasket is causing the problem now. I want to get the correct kit, rebuilb carb again, and see if it works. It's a 1977 International 184...
-
Bob McCarty
- Team Cub
- Posts: 11851
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: International 184
McDonaldcarb.com You probably don't need a whole kit, just the gaskets and fiber washers.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
outdoors4evr
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: International 184
Your poor 184 is probably starving for fuel and air. (actually, this shouldn't matter until you are wide open)
Why not install a Zenith carb?
Why not install a Zenith carb?
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
Gary Dotson
- Team Cub Mentor
- Posts: 5634
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: International 184
To my knowing, all 184’s were equipped with the Zenith carb. Are you sure yours is an IH? If you’re not sure, post a pic of it. Either way, McDonald carb can fix you up.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 9 guests
