Removed the manifold from a 184 and three of the nuts came off okay but one screwed out the bolt. Water started running out, to my surprise.
Is it normal for the third bolt from the front to screw all the way into the water jacket?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Manifold bolt hole into water jacket?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
seahaul
- 10+ Years
- Posts: 179
- Joined: Wed Dec 23, 2009 1:04 pm
- Zip Code: 28538
- Tractors Owned: LoBoy 185 with Woods mower
LoBoy 184 with Woods mower and 3-pt
LoBoy 184 with RM59-LB mower - Circle of Safety: Y
-
tst
- 10+ Years
- Posts: 5200
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
-
outdoors4evr
- 10+ Years
- Posts: 2788
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Manifold bolt hole into water jacket?
That's normal for a C60 Engine. Be sure to drain the water, chase the threads, and use a sealant when reinstalling.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 7 guests
