This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
184 Cub Loboy Won't Start
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 570
- Joined: Sun Feb 02, 2003 8:17 pm
- Zip Code: 45042
- Location: Middletown, OH
184 Cub Loboy Won't Start
This past week I've been get running the Cub I bought in KY last fall. The carb was gunked up and the governor and distributor had been tampered with. I removed the governor and made sure the two gear teeth were aligned. With the distributor removed I adjusted the distributor rotor so that just before the points open for No. 1 cylinder, I adjusted the drive lug so that it would fit up to the governor lug. As soon as I turn the rotor clockwise the high voltage coil wire sparks. While I crank the engine the timing gun shows between the 2 pulley marks. It tries to start, but won't. When I change the timing it backfires. I have spark to the plugs. Starting fluid almost starts it. I've intentionally tried to flood it, but so far haven't noticed gas on the plugs. I have a vacuum but haven't measured it. Dry cylinder pressure test is >70 PSI. I could change all the plugs I guess. I want it out of my garage to make room for more "stuff". I'd like to drive it out, but I'm starting to wonder. Appreciate any ideas. When I line up the rotor to a cylinder does it have to be #1 cylinder as long as the wires are in order? That's what I get when I watch Cspan while working on the tractor. My mind's getting fuzzy(er) Larry
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Team Cub Mentor
- Posts: 20388
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
John is correct, your timing is off.
The rotor rotation is clockwise. Points fire when they open. I think you should have turned the distributor counterclockwise until the spark occurred.
For initial timing I usually set the pointer just after the second mark - this retards the timing - fires just after TDC - making initial startups easier.
Eugene
The rotor rotation is clockwise. Points fire when they open. I think you should have turned the distributor counterclockwise until the spark occurred.
For initial timing I usually set the pointer just after the second mark - this retards the timing - fires just after TDC - making initial startups easier.
Eugene
-
- Similar Topics
- Replies
- Views
- Last post
-
-
LoBoy 154 coughs, but won’t start
by elmrfudd » Fri Apr 07, 2023 2:39 pm » in Lo-Boy Series - 154, 184, 185 - 31
- 878
-
by elmrfudd
Wed Apr 12, 2023 9:51 pm
-
-
-
My 154 won’t start… Attachment(s)
by ihcc104 » Sun Dec 18, 2022 12:04 pm » in Lo-Boy Series - 154, 184, 185 - 13
- 1667
-
by Rusty red
Fri Apr 28, 2023 10:17 am
-
-
- 5
- 301
-
by Mullda
Tue Nov 22, 2022 12:34 pm
-
-
LoBoy 154 - 3260 Deck Removal?
by Dougget » Mon Apr 01, 2024 9:33 am » in Lo-Boy Series - 154, 184, 185 - 3
- 118
-
by SONNY
Sun Apr 07, 2024 9:13 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest