This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Lubricants for 184
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 2
- Joined: Sat Jan 06, 2018 5:54 pm
- Zip Code: 38370
Lubricants for 184
What type of lubricant do you put in the distributor drive housing on a international 184?
-
- 5+ Years
- Posts: 255
- Joined: Tue Jul 29, 2014 4:16 pm
- Zip Code: 45325
- Tractors Owned: IH 184
- Location: Farmersville ohio
Re: Lubricants for 184
#2 multi purpose grease
-
- Team Cub Mentor
- Posts: 20416
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Lubricants for 184
Now that you have two posts you can down load the free manuals. Quick links, top left of this page. The Operator's Manual is listed.
Good reading and has a lubrication point chart and types of lubricant.
Good reading and has a lubrication point chart and types of lubricant.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 2796
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Lubricants for 184
Don't over-grease this area. Probably only needs one small shot of grease per year.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Lubricants for 184
To expand a little, you remove the plugs and install grease fittings. They can be left in, but do NOT over grease.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Lubricants for 184
When I worked for american motors AMC Jeep in 1970, they had plugs were they needed to be greased. The factory said they prefer using plugs instead of grease zerk fittings. Because the zerk fitting could allow water to get by the spring loaded ball in the zerk firing.
As far as using grease I use the grease with moly in it. The cheapest place I find it at is at TSC.
As far as using grease I use the grease with moly in it. The cheapest place I find it at is at TSC.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest