This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farm jeeps in action.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Farm jeeps in action.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Team Cub
- Posts: 24278
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Farm jeeps in action.
I know several of the guys in that video. The guy with one arm wearing the IH hat owns about half of those Jeeps. He has another that has a tow truck set up on it. Hueston Woods is about 45 minutes from me.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Farm jeeps in action.
I was told to go to a website to see what my Kelly locking hubs are worth. There rare and as soon as my splined flanges show up I’m removing the Kelly hubs making sure there still good and eBay them. I should make enough cash to buy a bigger borg n beck clutch kit for my Jeep tractor.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Team Cub
- Posts: 17290
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farm jeeps in action.
Did the state parks department know they were out there doing that or did they get a surprise later on?
-
- Team Cub
- Posts: 24278
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Farm jeeps in action.
Jim Becker wrote:Did the state parks department know they were out there doing that or did they get a surprise later on?
Jim, I don't know the answer to that. None of the guys from our Jeep Club were there. Those guys were from a club in the next county. I didn't know about it until I just saw the video. I guess I should ask Rick (the guy with the IH hat) or Joe (the guy with the big cigar) when I see them at our Jeep Swap meet next month.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub Mentor
- Posts: 5650
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Farm jeeps in action.
Man, those guys have the equipment! Looks like they had a lot of fun. I hope they had the blessing of ODNR! I almost looks like they have a designated playground area, where ODNR let's them play.
-
- 5+ Years
- Posts: 961
- Joined: Tue Nov 28, 2017 2:12 am
- Zip Code: 65608
- Tractors Owned: 49 F cub, donor
50 Farmall Cub bugeyes(dead)
55 Farmall Cub Clementine
55 International loboy
62 140 Industrial The Beast
50s Allis Chalmers B
50 Ferguson TO20 Huppster
49 Ferguson TE20 Fergie
JD 790 4x4 w/backhoe
hinomoto diesel 4x4, early to mid 80s 20HP
73 Pasquali 4x4 diesel 33HP
74 Toro golf course tractor
Gilson 18HP - Circle of Safety: Y
- Location: Missouri Ozarks
Re: Farm jeeps in action.
I blame farm jeeps for my fascination for duals on jeeps. I have been working on acquiring this since january, from my dodge puking to the polar vortex to you name it I have not got it done. This is not a farm jeep, it is an M38A1, 1952. First year for the M38A1 round fender jeep. the duals look to have been on this rig for some time. It does have rear facing PTO but nothing on the rear. I believe this to be a generator jeep. I have not seen it in person yet as it resides in central PA. There is some anecdotal evidence of generator jeeps having duals for the weight. The rear facing PTO with remnants of the shaft still there make me think it ran something midships. That would be correct for a mounted generator. lots of added leaves to the springs indicate it was beefed there for extra weight capacity. If I ever get it home I will determine the make of dual adapters, I have a set of reproduction Hickey dual adapters, new with all the studs, maybe I can run duals all around! LOL ( yes, they did run a few with duals on all 4 corners ). Gotta love watching a jeep with a 3 point plowing a field!
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Farm jeeps in action.
This is as far as I got with my Jeep tractor. I fabricated the front bumper. Boxed a ‘73 cj5 v8 frame with 3/8” plate steel. I fabricated a mini rock dump body. I’m going to drive the hydraulics from the rear pto. I has loc rite diff lockers f&r.
http://www.tractorshed.com/cgi-bin/gall ... os&cc=3&s=
http://www.tractorshed.com/cgi-bin/gall ... os&cc=3&s=
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Farm jeeps in action.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 5+ Years
- Posts: 33
- Joined: Thu Sep 14, 2017 2:53 pm
- Zip Code: 00000
Re: Farm jeeps in action.
I have the post hole digger in the YouTube video At 4:53 on one of my cubs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Farm jeeps in action.
To add Duallies we need those half round tapered steel washers to place in the inboard wheel spacer so it holds the rim center from working on the bolts. Other wise there’s no tapered bolt to fit the taper in the wheel center, as some found out here without the taper washers the wheel comes loose.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 5+ Years
- Posts: 961
- Joined: Tue Nov 28, 2017 2:12 am
- Zip Code: 65608
- Tractors Owned: 49 F cub, donor
50 Farmall Cub bugeyes(dead)
55 Farmall Cub Clementine
55 International loboy
62 140 Industrial The Beast
50s Allis Chalmers B
50 Ferguson TO20 Huppster
49 Ferguson TE20 Fergie
JD 790 4x4 w/backhoe
hinomoto diesel 4x4, early to mid 80s 20HP
73 Pasquali 4x4 diesel 33HP
74 Toro golf course tractor
Gilson 18HP - Circle of Safety: Y
- Location: Missouri Ozarks
Re: Farm jeeps in action.
this is my set, dont know whats on the m38A1, still working on an old truck to try n make the haul. dodge isnt gonna suck any more money from me.
this style is close to the "Hickey" style, he also made high compression heads for the L-head, ( flathead "go devil) The studs are right and left hand threads for the original jeep, the studs have the bevel to center the wheel, then the adapter simply slides over and the regular lug nuts are used
this style is close to the "Hickey" style, he also made high compression heads for the L-head, ( flathead "go devil) The studs are right and left hand threads for the original jeep, the studs have the bevel to center the wheel, then the adapter simply slides over and the regular lug nuts are used
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )
-
- 10+ Years
- Posts: 2499
- Joined: Sun Feb 17, 2008 2:38 am
- Zip Code: 07727
- Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G - Location: Farmingdale NJ
Re: Farm jeeps in action.
That's great ! I picticlarly like the auger and the backhoe.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"
"If it can cast a shadow, it can be restored"
-
- Team Cub
- Posts: 24278
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Farm jeeps in action.
I will be seeing Rick next weekend at our Jeep swap meet and will tell him we want more videos like this.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
How I plow snow at my farm
by Greenthumbfarms » Sat Feb 05, 2022 10:17 pm » in Other Tractors and Machinery - 0
- 261
-
by Greenthumbfarms
Sat Feb 05, 2022 10:17 pm
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests