This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Which one ???
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star!!
- Posts: 255
- Joined: Mon Nov 02, 2020 11:18 pm
- Zip Code: Nope
- Circle of Safety: Y
Which one ???
I have an a i really like to use. So the problem was , very hard to start cold and nearly impossible after it was running . I replaced the coil and condenser it runs as it should now . My question is , was it the coil or the condenser ? Both were brand new 3 years ago .
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Which one ???
Leave your new coil alone and replace your new condenser with the old one. See how it starts/operates. If no change, then I would assume it was the coil.
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Which one ???
Hard starting, ran like crap, condenser.
Check your multi-meter. Some have settings for testing condensers.
Check your multi-meter. Some have settings for testing condensers.
I have an excuse. CRS.
-
- 5+ Years
- Posts: 2837
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Which one ???
I had a lot of problems with ignition parts a year or two ago especially point and condensers. I had two sets of points where the spring broke. I switched to using Napa parts. They are more expensive but you can see they are of different quality at least with the points and cap. You can't tell looking at the capacitor.
Cub cap, Part Number: ECH IH350
Cub Rotor, Part Number: ECH IH300
Cub Points, Part Number: CS1600
Cub Condenser, Part Number: IH200
Starting issues I would go with the condenser. Not starting after it was hot I would go with the coil. You had both issues so maybe it was both.
Cub cap, Part Number: ECH IH350
Cub Rotor, Part Number: ECH IH300
Cub Points, Part Number: CS1600
Cub Condenser, Part Number: IH200
Starting issues I would go with the condenser. Not starting after it was hot I would go with the coil. You had both issues so maybe it was both.
When you only have 9 horsepower you need to know the names of all of the ponies!
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests