This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Helicoil Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- jasondepinto
- Cub Star
- Posts: 75
- Joined: Mon Sep 02, 2019 9:34 am
- Zip Code: 08889
- Tractors Owned: 1951 Farmall Cub
1956 Cub Loboy
1957 IH S-160 - Circle of Safety: Y
- Location: Whitehouse Station, NJ
Helicoil Question
Hello all. Can I use a helicoil on one of the bolt holes on the base plate of a Touch Control and still get a 35lb torque spec? What size/type of helicoil would I use? Does it take a different size bolt after the insert is in? Has anybody done this on a TC and not had any leaks on the bottom? Thanks in advance for any info!
- Slim140
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
Re: Helicoil Question
I don't see why you couldn't put a thread insert or helicoil in it. You can use the same size bolt depending on which one you get, I like to use thread inserts if possible. Here's a list of some on McMaster Carr. Helicoil uses special taps for their system and can get pricey.
https://www.mcmaster.com/threaded-inser ... g-inserts/
https://www.mcmaster.com/threaded-inser ... g-inserts/
Every home is a school, what are you teaching?
Who is online
Users browsing this forum: Glen and 41 guests