I rebuilt the carb this summer when putting it together and when testing it to see how strait I had gotten it. The last 1/4 to 3/8" when sliding the carb halves together. I got hard (sticking) and felt like the it air bleed tube was binding in the lower half of the carb. Is this supposed to be a tight fit or possibly some more gumed up carb I have to clean
Billy
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
A different carb question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
A different carb question
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Billy,
It should slide freely. Let us know what you find that prevents it.
It should slide freely. Let us know what you find that prevents it.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- Team Cub
- Posts: 17280
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Well looks like its put off for another week or so depending on how hetic next weekend is. Went out looking for #drill bit set I was suprised that sears did not have nor did tsc. Found one at a harbor frieght store but it only went down to .040 and I did not care for the quality. I need to get one now that I have a drill press anyway should have gotton one quite some time ago.
Billy
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Billy don't forget George took those readings with the 60 to 80 numbered drill bits. A standard set goes from 1 to 60. No 1 being the largest. These large numbers are like hair widths.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7
- 214
-
by Don McCombs
Mon Aug 15, 2022 4:40 pm
-
- 9
- 416
-
by John *.?-!.* cub owner
Wed Mar 30, 2022 2:37 pm
-
-
eBay/China Carb Troubles - Have a Question
by AL Farmall Boy » Thu Mar 30, 2023 5:35 pm » in Farmall Cub - 9
- 476
-
by AL Farmall Boy
Tue Apr 04, 2023 8:22 am
-
-
-
Identification of my Engine and Carb - in order to get a new Carb
by JKaechler » Tue Dec 07, 2021 9:25 pm » in Farmall Cub - 14
- 627
-
by Don McCombs
Thu Dec 09, 2021 11:42 am
-
-
- 3
- 189
-
by Bob McCarty
Wed Oct 06, 2021 4:47 pm
Who is online
Users browsing this forum: Leewebb7 and 1 guest