This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub 22 Hook up
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Robert Cool
- Posts: 32
- Joined: Tue Aug 04, 2020 10:04 am
- Zip Code: 28645
- Tractors Owned: 1971International Cub
- Location: Western NC
Cub 22 Hook up
In the manual I downloaded it says "Do not remove drawbar" ,But when I looked at TM Tractors pics it shows no drawbar, Does it make a difference to have the drawbar on or not?
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cub 22 Hook up
It doesn't matter much. Fairly early on in production, IH slightly changed the rear bracket of the mower, the obvious difference was addition of a spacer at the upper mounting bolt so it would be a proper fit with the drawbar in place. If you have the early bracket, it can be mounted with the drawbar in place. But I would add a spacer to the upper bolt to square-up the bracket. It will probably leave a slight misalignment of the drive shaft, but it shouldn't hurt anything.
- Robert Cool
- Posts: 32
- Joined: Tue Aug 04, 2020 10:04 am
- Zip Code: 28645
- Tractors Owned: 1971International Cub
- Location: Western NC
Re: Cub 22 Hook up
Thanks
- SONNY
- 10+ Years
- Posts: 4110
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: Cub 22 Hook up
Mine has the drawbar on it with some washers under the bracket----works just fine!
Who is online
Users browsing this forum: Cubfriend, Gary Dotson and 50 guests