Rear diff/axle

Farmall H, HV & Super H, 300 & 350, 1939-1958
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Posts: 6
Joined: Tue Sep 01, 2020 8:30 pm
Zip Code: 27253

Rear diff/axle

Postby Jameshmyers » Wed Sep 23, 2020 5:35 pm

Figured I’d ask one more to anyone out there who has spent some time messing with these tractors. I was going to replace a seal on the rear axle, losing some hydraulic fluid, slow drip.

Has anyone done this? Is the seal accessible once removing the wheel, or is it located deeper into, toward the center of the axle?

Any info would be appreciated. 1955-56 IH 300 utility.


Jim Becker
Team Cub
Team Cub
Posts: 17377
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Rear diff/axle

Postby Jim Becker » Wed Sep 23, 2020 7:19 pm

I don't know. But from the exploded view in the parts catalog, it appears that you need to remove the wheel, then the hub from the axle. You remove the cap with 4 bolts at the end of the axle housing to get at the seal. I assume the hub is pressed on and requires a huge puller to remove it.

  • Similar Topics
    Last post

Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 0 guests