This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Swinging drawbar measurments
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 32
- Joined: Tue Aug 04, 2020 10:04 am
- Zip Code: 28645
- Tractors Owned: 1971International Cub
- Location: Western NC
Swinging drawbar measurments
I would like to fab the center piece to the swinging drawbar set up, the section that would hookup to the implement is what I am looking for? I could just hook up what I have a guestimate but want it to be closer to right. Thanks
-
- Team Cub
- Posts: 11871
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Swinging drawbar measurments
I can't give you a drawing, but here are dimensions. Let me know if you need clarification on anything.
The stock is 2" x 3/8". The center piece is 31 3/8" long. The welded piece that the crossbar goes through is 5 1/8" long, measuring it straight. The bend starts 3 1/4" from the end and the gap is 3/4". At the other end, the angled piece which is welded on the opposite side is 6 3/8" long, measuring it straight. The bend starts 4" from the end. The free end of this piece is 4 3/8" from the end of the longest piece. The gap is 1". There is a bend in the longest piece that's hard to describe. If the bar is completed and laying on the floor with the second bent piece on top, there is a gap of 1 1/2" at the weld of the second piece.
You may need to sketch that out to understand it.
The stock is 2" x 3/8". The center piece is 31 3/8" long. The welded piece that the crossbar goes through is 5 1/8" long, measuring it straight. The bend starts 3 1/4" from the end and the gap is 3/4". At the other end, the angled piece which is welded on the opposite side is 6 3/8" long, measuring it straight. The bend starts 4" from the end. The free end of this piece is 4 3/8" from the end of the longest piece. The gap is 1". There is a bend in the longest piece that's hard to describe. If the bar is completed and laying on the floor with the second bent piece on top, there is a gap of 1 1/2" at the weld of the second piece.
You may need to sketch that out to understand it.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Team Cub Mentor
- Posts: 17513
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Swinging drawbar measurments
Look on the TM Tractor Parts website for the Gallery. Good photos there of the assembly.
-
- Team Cub
- Posts: 11871
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Swinging drawbar measurments
To facilitate Don's suggestion: http://www.tmtractor.com/tm-tractor/gdr/swngbar_001.htm
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Swinging drawbar measurments
This discussion reminded me of swinging drawbar questions I had a while back. Never did have the torched off piece added because I ended up with another swinging drawbar. Never did find out the overall drawbar length for a lo boy version.
http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=65709&p=535864&hilit=swinging+drawbar#p535864
http://farmallcub.com/phpBB2/viewtopic.php?f=1&t=65709&p=535864&hilit=swinging+drawbar#p535864
-
- Posts: 32
- Joined: Tue Aug 04, 2020 10:04 am
- Zip Code: 28645
- Tractors Owned: 1971International Cub
- Location: Western NC
Re: Swinging drawbar measurments
Thanks, I will have one made if I can't locate one
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15
- 523
-
by SONNY
Fri Oct 29, 2021 6:04 pm
-
- 6
- 261
-
by Glen
Sun Jan 01, 2023 7:25 pm
-
-
Re: What are the Drawbar Brackets for? Attachment(s)
by Farmer Dell » Mon May 24, 2021 10:21 am » in Farmall Cub - 9
- 630
-
by Jim Becker
Wed Jun 16, 2021 10:27 am
-
-
- 8
- 513
-
by John *.?-!.* cub owner
Sat Aug 21, 2021 12:22 pm
-
- 5
- 506
-
by SamsFarm
Fri Dec 24, 2021 3:44 pm
Who is online
Users browsing this forum: Cub driver, Glen, nwfan1 and 3 guests