I replaced the clutch a few years ago, and one of the clutch finger adjustment bolts came loose, of course along with its locking nut. Does anybody have any idea what the torque specifications are for that locking nut on the clutch finger adjustment bolt? The bolts with the round ends that fit into an indent in the clutch finger to position it?
Don
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Clutch Finger Bolt Torque?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 344
- Joined: Tue May 05, 2009 9:54 am
- Zip Code: 65101
- Location: Jefferson City, MO
Clutch Finger Bolt Torque?
1959 International Cub Lo-Boy W/Fast hitch, 59 Woods, dozer blade, plow
1954 Farmall Super C W/Fast hitch, belly dozer blade
1950 Farmall M
1954 Farmall Super C W/Fast hitch, belly dozer blade
1950 Farmall M
-
- 10+ Years
- Posts: 4945
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Clutch Finger Bolt Torque?
It's 1/4-20 IIRC. Torque spec for that size bolt is 8 ft-lbs.
I don't think there's an IH torque spec for that specific bolt.
I don't think there's an IH torque spec for that specific bolt.
-
- 10+ Years
- Posts: 5188
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Clutch Finger Bolt Torque?
the nut came loose 1st then the screw backed out, see that a lot, I use red lock tite on those and they never come loose
Who is online
Users browsing this forum: Don McCombs and 26 guests