Cub 22 mower question

[cdd]

Is it possible to use the upper holes on the torque tube to mount the mower? My lower ones are stripped and I have not got the helicoiled yet.

[Bob McCarty]

No, the brackets won't line up and that part of the mower wouldn't be level with the ground.

[cdd]

Thanks wasn’t sure

[Don McCombs]

You can use a piece of all-thread that goes all the way through the torque tube with double nuts on the outside of the bracket, temporarily.

[cdd]

You can use a piece of all-thread that goes all the way through the torque tube with double nuts on the outside of the bracket, temporarily.

Hmm never thought of that

[Don McCombs]

Make sure those nuts stay good and tight.

[Barnyard]

You can use a piece of all-thread that goes all the way through the torque tube with double nuts on the outside of the bracket, temporarily.

Hmm never thought of that

I mentioned this yesterday in your original post.