Just got interested in Cubs. Don't own one yet, but looking. Looking forward to learning more about them. I'm interested in some small scale row crops and the options with a Cub.
Thanks,
Mike
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hey from Louisiana.
-
- 10+ Years
- Posts: 6154
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Hey from Louisiana.
Hi,
Welcome to the website.
You can learn some about a Farmall Cub by reading the operator's manual for one.
The manual has lots of info about operation, maintenance, and lubrication.
They show how Cubs originally looked.
The electrical systems were changed some through the years.
IH changed Cubs to 12 volts during 1964, before then they were 6 volts.
There are Cub owner's and operator's manuals at the top of the page at Cub Info, then go to Rudi's Manuals.
You should inspect the Cub's castings before buying one, to be sure they aren't damaged.
There is a place on earlier Cubs where the engine block can crack. It is at the right front area of the block, where the front end bolts to the engine. Look closely for a crack there, it can be covered by dirt or grease.
Below is a pic of the area, a crack can happen in the corner, where the black oil is, near the cooling system hose. One bolt is not there that holds the front end on in the pic.
You could also check the threads of the 5/8" implement attaching holes, sometimes they are worn, sometimes they are gone.
The holes are on the sides of the clutch housing, and on the inner sides of the final drives.
Cubs came with corks in the holes, they could be painted over. They can look like a broken bolt, but aren't.
Welcome to the website.
You can learn some about a Farmall Cub by reading the operator's manual for one.
The manual has lots of info about operation, maintenance, and lubrication.
They show how Cubs originally looked.
The electrical systems were changed some through the years.
IH changed Cubs to 12 volts during 1964, before then they were 6 volts.
There are Cub owner's and operator's manuals at the top of the page at Cub Info, then go to Rudi's Manuals.
You should inspect the Cub's castings before buying one, to be sure they aren't damaged.
There is a place on earlier Cubs where the engine block can crack. It is at the right front area of the block, where the front end bolts to the engine. Look closely for a crack there, it can be covered by dirt or grease.
Below is a pic of the area, a crack can happen in the corner, where the black oil is, near the cooling system hose. One bolt is not there that holds the front end on in the pic.
You could also check the threads of the 5/8" implement attaching holes, sometimes they are worn, sometimes they are gone.
The holes are on the sides of the clutch housing, and on the inner sides of the final drives.
Cubs came with corks in the holes, they could be painted over. They can look like a broken bolt, but aren't.
- Attachments
-
- Cub block 14.jpg (51.51 KiB) Viewed 134 times
-
- Team Cub Mentor
- Posts: 20382
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Hey from Louisiana.
Cubs are great little tractors. I own two. But, I also own larger tractors. Suggest looking for a larger more "standard" tractor.
Cons of Cub ownership. Engine is not sleeved. PTO is not standard and commonly available equipment will not work. Some implements are expensive, very expensive, and hard to find. Changing implements can be a problem for elderly, and is time consuming.
Pros. Easy to work on. Good small tractor for light work.
Cons of Cub ownership. Engine is not sleeved. PTO is not standard and commonly available equipment will not work. Some implements are expensive, very expensive, and hard to find. Changing implements can be a problem for elderly, and is time consuming.
Pros. Easy to work on. Good small tractor for light work.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 4998
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: Hey from Louisiana.
Welcome to the forum. IMO the quickest and best way to get a short intense course on Cubs is to attend a Cubfest. One more post and you can access the manuals section at the Quick links tab, top left corner of this page. Scroll down to pdf manuals and select what interests you. Stan
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
-
- Posts: 2
- Joined: Wed May 31, 2023 11:57 pm
- Zip Code: 70634
Re: Hey from Louisiana.
Thank you all for the welcome and information.
Mike
Mike
-
- 10+ Years
- Posts: 7833
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Hey from Louisiana.
Welcome to the forum from the north end.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 2 guests