Hey guys,
Appreciate it if anyone could tell me if there is a vent hole on the rear end of a 1972 IHC Cub tractor. According to what I was told all rear ends have a vent hole in them.
Need to know if it has a vent hole and if so where is it located.
Thanks for the help and the forum.
Jim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Vent Hole for rear end 72 IHC cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
jim5644
- Posts: 21
- Joined: Tue Jul 14, 2020 7:15 pm
- Zip Code: 28173
-
john2189
- 10+ Years
- Posts: 1782
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
Re: Vent Hole for rear end 72 IHC cub
The fill plug behind the shifter should have a hole in it for the transmission. You might want to check to see if it is open with a small wire.
I don’t think the final drives has a vent.
I don’t think the final drives has a vent.
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
Dale Finch
- 10+ Years
- Posts: 6776
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Vent Hole for rear end 72 IHC cub
I may be wrong, but I believe only the STEERING housing has the vented plug.
Dale Finch
-
Don McCombs
- Team Cub Mentor
- Posts: 17672
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Vent Hole for rear end 72 IHC cub
True. The transmission/differential is sufficiently vented through the unsealed shifter tower.
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
-
john2189
- 10+ Years
- Posts: 1782
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
Re: Vent Hole for rear end 72 IHC cub
Dale Finch wrote:I may be wrong, but I believe only the STEERING housing has the vented plug.
The 72 cub i sold last year was vented. Maybe the owner before me drilled it.
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
JimCub48
- 5+ Years
- Posts: 217
- Joined: Mon Feb 09, 2015 2:57 pm
- Zip Code: 56377
Re: Vent Hole for rear end 72 IHC cub
I think there is a vent hole or weep plug on the Pto adapter, there is a vent plug on the hub city 22 reversed reducer.
-
Dale Finch
- 10+ Years
- Posts: 6776
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Vent Hole for rear end 72 IHC cub
If you have a hole on your PTO adapter, it is probably where a PRESS-IN grease zerk is supposed to be:
http://www.tmtractor.com/new/pt/212fp.htm
http://www.tmtractor.com/new/pt/212fp.htm
Dale Finch
-
jim5644
- Posts: 21
- Joined: Tue Jul 14, 2020 7:15 pm
- Zip Code: 28173
Re: Vent Hole for rear end 72 IHC cub
I did check the fill plug today and there is no vent hole in it. I bought the Cub new and picked it up at their distribution center not from a dealer so assume it is correct. Appreciate the ideas and any other ideas.
Jim
Jim
-
john2189
- 10+ Years
- Posts: 1782
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
Re: Vent Hole for rear end 72 IHC cub
Hi its cool you are the original owner. What do you use it for ? Did you buy any implements for it? A few pics would be nice
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
jim5644
- Posts: 21
- Joined: Tue Jul 14, 2020 7:15 pm
- Zip Code: 28173
Re: Vent Hole for rear end 72 IHC cub
Hey John,
I mounted a IHC C-2 mower under the belly of the tractor and use it to cut about 3 1/2 acres of so called yard with it.
Some years ago there used to be a fair amount of people using the Cubs and Cub lowboy for cutting large areas of grass. Don't see it much anymore.
I also have a big disc plow but have not used it much.
It is a real shame that they don't make things as solid as they used to.
Sorry I don't know how to post pictures to the website.
Best to you and yours.
I mounted a IHC C-2 mower under the belly of the tractor and use it to cut about 3 1/2 acres of so called yard with it.
Some years ago there used to be a fair amount of people using the Cubs and Cub lowboy for cutting large areas of grass. Don't see it much anymore.
I also have a big disc plow but have not used it much.
It is a real shame that they don't make things as solid as they used to.
Sorry I don't know how to post pictures to the website.
Best to you and yours.
-
JimCub48
- 5+ Years
- Posts: 217
- Joined: Mon Feb 09, 2015 2:57 pm
- Zip Code: 56377
Re: Vent Hole for rear end 72 IHC cub
The vent hole weep hole on the bottom of the PTO drive belt assembly, ? is what I was referring to, I have no idea what that is for?
-
Don McCombs
- Team Cub Mentor
- Posts: 17672
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Vent Hole for rear end 72 IHC cub
Most likely a drain hole to release built up fluids, like the one in the clutch housing.
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 223
-
by Gary Dotson
Sun Jun 19, 2022 7:32 am
-
- 12
- 487
-
by Gary Dotson
Thu Mar 28, 2024 7:53 am
-
- 19
- 486
-
by outdoors4evr
Fri Jun 16, 2023 1:32 pm
-
- 15
- 783
-
by Eugene
Thu Nov 30, 2023 12:37 pm
-
- 12
- 373
-
by SamsFarm
Mon May 29, 2023 11:13 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 5 guests
