This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Fast Hitch lever measurement needed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Fast Hitch lever measurement needed
Hi Guys. I received all the parts to convert a broken fast hitch adjusting lever(called---Fast Hitch adjusting lever with quadrant brace) that belongs to Peter Person(what a great guy). I need a measurement of the total length of the lever. Maybe measure from the centerline of the bottom pivot pin to the top of the handle(not the button). His was broken off right above the quadrant and I'd like to make it as original as possible. The part number of the actual lever is 520152R11. If you have the Support Pro disc, the lever is part of the pictured assembly#520164R91, probably somewhere around 36" long. Wish I could figure a way to post the pic . Thanks Alan for the needed handle and Thanks guys for the upcoming measurement, Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Rick - are you talking about the front bail height adjustment lever that was replaced by a crank on the later style?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Yep, probably. This has the button on the top and raises and lowers the front of the fast hitch. It bolts to the front of the right final and the quadrant bolts to the rt fender with a brace bolting to the platform
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Cub Pro
- Posts: 4561
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
Yup, that's the one.
I met Rick on Saturday morning along RT 24 on my way back to CT.
Looking forward to installing the finished product at CubFest in June.
Thanks for all your help.
Now all I need is the diagonal link assembly and I'll be as close to original as necessary.
Peter
I met Rick on Saturday morning along RT 24 on my way back to CT.
Looking forward to installing the finished product at CubFest in June.
Thanks for all your help.
Now all I need is the diagonal link assembly and I'll be as close to original as necessary.
Peter
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Rick - I measured 46" from the center of the bottom hole to the top of the lever - not counting the button.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Holy Cow, No wonder the thing was broke off. It sticks up and out a "Country" mile .
Bigdog, could I talk you into taking one more pic of a close-up of this shot, right at the place where the lever makes that bend at the quadrant brkt(7 slots). If you get a chance, I would appreciate it. I plan to do this project the first part of next week. Here's the pic I "borrowed" from you , Thanks,Rick
Bigdog, could I talk you into taking one more pic of a close-up of this shot, right at the place where the lever makes that bend at the quadrant brkt(7 slots). If you get a chance, I would appreciate it. I plan to do this project the first part of next week. Here's the pic I "borrowed" from you , Thanks,Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Rick - that extreme bend is there because someone was using the lever as a means to get up onto the cub. I will straighten this one when I get a chance. I can get you a picture though if you need it.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
-
- Cub Pro
- Posts: 4561
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
That looks awesome.
I take it there is more difference with the Fast-Hitch Lever versus the Manual Lift Lever than we all thought at the beginning of this little project.
All I managed to do today was get the nicks and dings out of my rear rims before bringing them to the powder coaters this week, then get the tires mounted in time to bring the Cub to Ohio for CubFest and put this lever back on and try my hand at plowing.
Peter
I take it there is more difference with the Fast-Hitch Lever versus the Manual Lift Lever than we all thought at the beginning of this little project.
All I managed to do today was get the nicks and dings out of my rear rims before bringing them to the powder coaters this week, then get the tires mounted in time to bring the Cub to Ohio for CubFest and put this lever back on and try my hand at plowing.
Peter
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
-
- Cub Pro
- Posts: 4561
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
For those who did'nt see it being installed at CubFest here is another fine creation from Rick Prentice.
We determined that all I need to do is have the quadrant flattened back into it's original shape and the lever will glide through the whole range.
Thanks Rick!
01-24-2012: edited to put photo back in.
We determined that all I need to do is have the quadrant flattened back into it's original shape and the lever will glide through the whole range.
Thanks Rick!
01-24-2012: edited to put photo back in.
Last edited by Peter Person on Tue Jan 24, 2012 5:24 pm, edited 1 time in total.
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
-
- Team Cub Mentor
- Posts: 17502
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 254
-
by Scotty777
Mon Aug 09, 2021 3:49 pm
-
- 13
- 1368
-
by SamsFarm
Mon Jun 28, 2021 12:37 am
-
- 2
- 170
-
by Glen
Tue Mar 05, 2024 6:15 pm
-
- 5
- 156
-
by Glen
Fri Aug 04, 2023 4:55 pm
-
- 16
- 312
-
by cdd
Fri Aug 12, 2022 7:02 am
Who is online
Users browsing this forum: Don McCombs and 7 guests