I just picked up a Wisconsin TF Twin at an auction. It looks good and will make a cool stationary display at the shows. Only paid 17.50 for it. The Carb I got for it off Ebay cost more to ship than engine cost. But back to my question. I would like to know what it came off of . I know they were used for a multitude of things. Like Tillers,Bailers,Sawmill,Pumps,
Grains Drills, I am trying to find out what exactly mine came off. It Has a bellhousing Labeled Rockford Clutch with a Flat stock Lever. This goes into what looks like a Tranny or gear reducer. This item has a flat plate on top that says fill to level plug and a 3-4 inch round and 3 inch long gear. Anybody have anythoughts. I want to I.D. what it came from for my staionary display signs.
Thank you
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Wisconsin TF Engine Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 341
- Joined: Wed Nov 08, 2006 9:35 pm
- Location: Backswamp North Carolina
Wisconsin TF Engine Question
1961 Cub
1948 Cub
1960 CUB
1964 CUB CADET 100
23A Disc,2-C-22 sickles,54 Blade,152 disc,38a lift disc,C2 Mower,Kub Klipper, and a side dresser.
1948 Cub
1960 CUB
1964 CUB CADET 100
23A Disc,2-C-22 sickles,54 Blade,152 disc,38a lift disc,C2 Mower,Kub Klipper, and a side dresser.
-
- 10+ Years
- Posts: 4118
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
The TF I have has the hand clutch and a four or five inch three grouve pulley on it and they had no specific use, that I know of, just anything you needed them for! The last use mine saw was on a short load-out auger for a grain bin, could also work on medium size cement mixer, concrete saw! Don't there is a code that says what the origional use was, at least I never heard of one! thanks; sonny
-
- 10+ Years
- Posts: 4118
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
This site seems to have some good Wisc. info, too!
http://www.wisconsinmotorscanada.ca/index.html
just ran into it tonight. Found a parts store ror wisc, but cant get the link to work!
thanks; sonny
http://www.wisconsinmotorscanada.ca/index.html
just ran into it tonight. Found a parts store ror wisc, but cant get the link to work!
thanks; sonny
-
- Similar Topics
- Replies
- Views
- Last post
-
-
F134 CJ5 engine disassembly Attachment(s)
by staninlowerAL » Fri Jul 15, 2022 3:56 pm » in Other Tractors and Machinery - 19
- 2242
-
by staninlowerAL
Fri Jan 20, 2023 9:11 pm
-
-
-
Looking for 1924 Stewart truck Lycoming Engine ignition terminals
by Bob McCarty » Sat Apr 22, 2023 5:51 pm » in Other Tractors and Machinery - 1
- 1128
-
by tst
Sat Apr 22, 2023 9:22 pm
-
-
- 2
- 182
-
by v w
Sat Sep 17, 2022 7:45 pm
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 1 guest