I was wondering if I could put the bolts for the rear wheel weights on the rims and put a nut on and tighten it down then put the weights on with another nut???.Is there enough clearance on the back of the wheel weights (in the little cavity) to do this???
thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
rear wheel weights
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 273
- Joined: Sun Aug 12, 2007 5:21 pm
- Zip Code: 00000
- Location: OH,
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
With my center disc turned outward I put a 2x4(short piece) on the rim and use a 2x6 for a ramp to get the disc up there then put the bolts in from the rear. Its easy to steady the wheel weights on the 2x4 wood.
Otherwise you need to pick up the wheel weights to get them on the fixed studs(your way).
Otherwise you need to pick up the wheel weights to get them on the fixed studs(your way).
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 21
- 651
-
by Pap
Sun Sep 05, 2021 2:07 pm
-
-
Installing Rear Wheel Weights Attachment(s)
by MarrColton » Fri Jul 16, 2021 7:47 am » in Farmall Cub - 5
- 516
-
by randyny
Thu Jul 29, 2021 7:33 pm
-
-
- 2
- 310
-
by Eugene
Wed Jun 16, 2021 11:18 am
-
- 3
- 246
-
by radioguy41
Tue Jan 23, 2024 7:07 pm
-
- 3
- 275
-
by Stanton
Mon Oct 04, 2021 6:20 am
Who is online
Users browsing this forum: No registered users and 6 guests