Guys,
I have an IH mower p/n 3142 U-1111, it looks like the one referred to as a "C-2" mower in my manuals. I am in the process of disassembling it for maintenance and re-painting.
How do you remove the lower cone bearing? The blade mounting bar is welded to the bottom of the shaft, and that makes it impossible to get a pulley puller around the inner part of the bearing which is stuck fast to the shaft.
Is there a tool for removing bearings? I've heard of one used on rear axle auto bearings but have never seen or used one.
Thanks,
John F.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Belly mower bearings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 70
- Joined: Thu Aug 16, 2007 6:14 am
- Location: Richmond, TX
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 323
-
by inairam
Sun Jun 05, 2022 6:17 pm
-
- 7
- 216
-
by Bob McCarty
Wed Jun 23, 2021 10:21 pm
-
- 6
- 666
-
by welderrx
Mon Aug 28, 2023 7:17 am
-
- 0
- 164
-
by tractorpoor
Wed Sep 01, 2021 11:45 am
-
- 2
- 184
-
by SmcIN123
Thu Oct 13, 2022 4:24 pm
Who is online
Users browsing this forum: Oramski and 3 guests