Well, after months of work, I finally completed the installation of my new radiator and the repainting and reassembly of my "49 cub. The goal is to have it ready to ride in the local 4th of July parade on Sunday.
This evening I realized that I forgot to repolarize my rebuilt generator. (Had the regulator replaced at the same time.)
Now, with the hood, grill, etc., all reinstalled, it looks like I am going to have to tear it down again in order to repolarize the generator. I have looked under the hood and can't really see the correct terminals on the regulator and generator without removing the hood. (Frankly, even with the hood off I am not entirely sure I will be able to ascertain which terminal is the "A" terminal on the generator unless it is clearly marked.)
Here is my question ... is it absolutely essential to repolarize the generator? I am recharging the battery now and plan to try to start the tractor tomorrow afternoon (unless I have to take off the hood again).
Final point: When I picked up the rebuilt generator from my local tractor shop, I asked whether I needed to repolarize the generator and was told that when the generator was rebuilt they did that and it is not required. I suppose that is why I put the entire subject out of my mind until now.
Thanks for any assistance you may be able to provide.
Tom
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Repolarizing Generator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 53
- Joined: Sat Apr 12, 2003 7:53 pm
- Location: San Diego, California
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
If you fire it up and it charges, you're OK.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 53
- Joined: Sat Apr 12, 2003 7:53 pm
- Location: San Diego, California
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11
- 554
-
by Gary Dotson
Thu Sep 29, 2022 7:34 am
-
- 7
- 304
-
by halftonstude
Wed Nov 23, 2022 5:06 pm
-
- 17
- 627
-
by Matt Kirsch
Mon Mar 18, 2024 2:17 pm
-
- 17
- 515
-
by BSFlyBoy
Mon Sep 06, 2021 1:01 pm
-
- 5
- 612
-
by Glen
Thu Oct 21, 2021 1:30 am
Who is online
Users browsing this forum: JNewton and 4 guests