This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Mower blade nut size?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 119
- Joined: Tue Nov 16, 2004 3:11 pm
- Location: Il, Collinsville
Mower blade nut size?
Can anyone tell me what size socket I need to remove the blades on the three blade 60" mower deck?
dennis
"Hey, I didn't get a harumpf outta that guy!"
"Hey, I didn't get a harumpf outta that guy!"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Mower blade nut size?
Hey Dennis. I was over George Hibb's place today and we measured his 185 deck(IH) blade bolts. It uses 2 bolts for each spindle that are 1/2-13 x 1-3/4" long. They use a 3/4" wrench with 3/4"wrench to also hold the nuts underneath(also had lock washers). Hope that helps and you still need the info.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 119
- Joined: Tue Nov 16, 2004 3:11 pm
- Location: Il, Collinsville
Re: Mower blade nut size?
Thanks Rick. I could have sworn that the nuts that held the blades on were bigger than that, but I've slept since I looked at them last. I think I'll just take the whole set.
Thanks again for looking.
Thanks again for looking.
dennis
"Hey, I didn't get a harumpf outta that guy!"
"Hey, I didn't get a harumpf outta that guy!"
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Re: Mower blade nut size?
If it's like everything else involved with these tractors, they made changes like we change our socks Surprises everyday With the bolts/nuts being removable, who knows what the originals may have been. I think I'd also take the whole set
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Looking for belt size for mower 3160 deck Attachment(s)
by Dan Stuckey » Tue May 31, 2022 8:32 pm » in Lo-Boy Series - 154, 184, 185 - 1
- 409
-
by indy61
Wed Jun 01, 2022 5:15 am
-
-
- 2
- 292
-
by 1suffolkmare
Fri Mar 24, 2023 1:58 pm
-
-
Farmall 54 plow/dozer blade install on Lo Boy
by Sflash » Mon May 17, 2021 8:10 am » in Lo-Boy Series - 154, 184, 185 - 1
- 409
-
by SONNY
Tue May 18, 2021 12:05 am
-
-
-
Cub Low Boy 154 Mower question?
by Hausfire28 » Sun Mar 31, 2024 8:07 pm » in Lo-Boy Series - 154, 184, 185 - 2
- 124
-
by outdoors4evr
Wed Apr 17, 2024 7:34 am
-
-
- 5
- 386
-
by john2189
Mon May 09, 2022 4:51 pm
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 1 guest