Got all four of the old bolts that held the battery box in place out this am. About two weeks of penatrating oil and tapping plus thanks to John *.?-!.* for his suggestion of getting a Bolt-Out (got it at Sears). This got three of the well rounded bolts straight up. The forth broke off flush but a left twist drill got most of it out. Ran a chase down the hole and used a little longer bolt in this hole this time, gripped good.
Thanks for the advise and encouragement I got from all on this site. Also if anyone hasn't seen Roger Welsch's books, they are worth looking at, even though he is a Allis WC man. Lots of good advise for the beginner, lots of humor and a easy read.
Now onto removing the seat (more well rusted bolts) and then both of the final drives need new seals and gaskets (arrived yesterday) plus one is cracked and needs changed out (got one a couple of weeks ago). Also will be doing a brake job since I'm in there anyway. Again thanks guys, I am sure there will be more questions in the near future.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Buggy 4, Bolts 0
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 52
- Joined: Thu Jul 01, 2004 6:07 am
- Location: Shelby County Alabama
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Congrats Buggy! Don't ya love it when a plan falls together?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Rear main seal plate bolts tightness. Direction rod cap bolts
by pett3227b » Thu Jun 02, 2022 12:31 pm » in Farmall Cub - 8
- 311
-
by Mht
Mon Jun 06, 2022 6:48 pm
-
-
- 1
- 151
-
by Bob McCarty
Wed Apr 05, 2023 7:06 pm
-
- 1
- 247
-
by Don McCombs
Tue Jan 16, 2024 12:37 pm
-
- 11
- 374
-
by Pap
Mon Jul 05, 2021 8:14 am
-
- 2
- 183
-
by Stoffregen Motorsports
Wed Sep 06, 2023 2:40 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests