I just bought a 1701 loader for my 340. Got a good price ($350), but it's pretty rusty from sitting outside. Arm cylinders are fine, but the bucket cylinder leaks and needs to be rebuilt. But that's all do-able. Here's my problem: the holes the pins go through where the arms pivot to the frame are worn and elongated from wear. The pins are almost falling out. I've been told that this is a common problem with used loaders and backhoes and that replacement pins and bushings can be purchased. Apparently you weld the bushing plate over the top of the old hole. Does anyone have experience doing this? Where would you find parts such as these - I assume they are generic and not necessarily IH items.
Thanks
Paul
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Replacement Loader Parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Replacement Loader Parts
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Paul. That's what I did with my front bucket when the arm was built. I made the holes in the sides big enough to accept a bushing on each side or one cut in half and installed the pins back through everything to line things up and then welded around the bushings. Then use a grinder to flaten things down on the outside and you won't be able to tell a repair was ever done
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Power King parts list and parts
by John *.?-!.* cub owner » Wed Aug 18, 2021 9:52 pm » in Other Tractors and Machinery - 4
- 725
-
by John *.?-!.* cub owner
Fri Aug 20, 2021 8:26 pm
-
-
-
JD 420-C loader Attachment(s)
by SONNY » Wed Nov 30, 2022 12:05 pm » in Other Tractors and Machinery - 4
- 277
-
by SamsFarm
Mon Dec 05, 2022 1:05 am
-
-
-
little genius plow parts
by getitrunning » Thu Aug 03, 2023 6:49 pm » in Other Tractors and Machinery - 0
- 1088
-
by getitrunning
Thu Aug 03, 2023 6:49 pm
-
-
-
Painted some John Deere parts Attachment(s)
by cjet69 » Sun Dec 10, 2023 1:30 pm » in Other Tractors and Machinery - 7
- 5554
-
by cjet69
Wed Dec 20, 2023 8:22 pm
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 1 guest