Here is the TN retired redneck Seabee method of removing a Farmall H belly pump:
1. Place a hay bale length wise under the belly pump.
2. Place two 4 x 4s stacked on top of the hay bale and under the belly pump.
3. Slowly remove the four mounting bolts until the belly pump sits on the 4 x 4s.
5. Cut the bale strings and rock the belly pump until it is free of the tractor.
6. Slide the belly pump out from underneath the tractor
7. Clean up the hay bale and 4 x 4s.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
HOW DO YOU TEST A FARMALL LIFT ALL?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 174
- Joined: Wed Sep 12, 2007 11:36 pm
- Zip Code: 38487
- eBay ID: liverider
- Location: Williamsport, TN
Re: HOW DO YOU TEST A FARMALL LIFT ALL?
R,
"Phil D"
1951 Cub, L-54 grader blade, 144 Cultivators, 193 Mold Board Plow, 23-A Disc Harrows, 1951 Farmall "H", 2010 Farmall 35, 1951 John Deere B, 1956 John Deere 70.
"Phil D"
1951 Cub, L-54 grader blade, 144 Cultivators, 193 Mold Board Plow, 23-A Disc Harrows, 1951 Farmall "H", 2010 Farmall 35, 1951 John Deere B, 1956 John Deere 70.
-
- Team Cub
- Posts: 17283
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: HOW DO YOU TEST A FARMALL LIFT ALL?
liverider wrote:Here is the TN retired redneck Seabee method of removing a Farmall H belly pump:
Reverse the procedure to install?
-
- 10+ Years
- Posts: 174
- Joined: Wed Sep 12, 2007 11:36 pm
- Zip Code: 38487
- eBay ID: liverider
- Location: Williamsport, TN
Re: HOW DO YOU TEST A FARMALL LIFT ALL?
Yes,
I haven't figured out how to get the strings tight around the bale but will keep you posed.
I haven't figured out how to get the strings tight around the bale but will keep you posed.
R,
"Phil D"
1951 Cub, L-54 grader blade, 144 Cultivators, 193 Mold Board Plow, 23-A Disc Harrows, 1951 Farmall "H", 2010 Farmall 35, 1951 John Deere B, 1956 John Deere 70.
"Phil D"
1951 Cub, L-54 grader blade, 144 Cultivators, 193 Mold Board Plow, 23-A Disc Harrows, 1951 Farmall "H", 2010 Farmall 35, 1951 John Deere B, 1956 John Deere 70.
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 0 guests