I took a little video of Jim Becker's walking tour at Cubarama so some of the new guys here could learn about some of the various implements that are used on Cubs. The video is not about the event, but about the implements that were there.
A big thanks to Jim for taking time to explain these to the many new folks who were there.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
A little lesson about Cub Implements for the new guys!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 24278
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
A little lesson about Cub Implements for the new guys!
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 602
- Joined: Wed Apr 20, 2005 6:41 am
- Location: Norwich,Ontario
Re: A little lesson about Cub Implements for the new guys!
Jim Becker that was an excellent and very informative walk-around talk you did on the Cub and related implements.
A talk and PICS are worth way more than a thousand words, as the old saying goes. Thankyou.
A talk and PICS are worth way more than a thousand words, as the old saying goes. Thankyou.
IHC made a quality machine and was leader of the pack.Let's keep them running,
-
- 10+ Years
- Posts: 1174
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Re: A little lesson about Cub Implements for the new guys!
Enjoyed the video. Nice to see a couple of things I had only heard about. Vern
-
- 10+ Years
- Posts: 3561
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: A little lesson about Cub Implements for the new guys!
Thanks Jim and Bill !! Enjoyed learning some new info.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 7834
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: A little lesson about Cub Implements for the new guys!
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- Team Cub Guide
- Posts: 3544
- Joined: Sun Feb 02, 2003 6:30 pm
- Zip Code: 38658
- eBay ID: Cub-Bud
- Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
- Circle of Safety: Y
- Location: MS, Pope
Re: A little lesson about Cub Implements for the new guys!
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"
Greg Norman
Greg Norman
-
- 10+ Years
- Posts: 1050
- Joined: Tue Apr 26, 2011 10:47 am
- Zip Code: 44266
- Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C - Circle of Safety: Y
- Location: Ravenna, Ohio
Re: A little lesson about Cub Implements for the new guys!
Thanks Bill for posting the videos and thanks Jim for the interesting and informative talks!
-
- Team Cub
- Posts: 17288
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: A little lesson about Cub Implements for the new guys!
Sorry about the wind noise. I was hard enough to hear even when the wind was a little subdued.
I've been doing this for several years. Each year is different because it depends on what is on display. Once or twice, I did it on both Friday and Saturday and it changed because of the implements that had come or gone between the two days. This year's was a little shorter than the past as the display area was a little light on variety (partly because it was a light year and partly because we started at 1 PM on Saturday and quite a bit had already been loaded out.
We had a few first timers in the crowd. I didn't get a chance to talk with them after we finished. I hope they found it worthwhile.
I've been doing this for several years. Each year is different because it depends on what is on display. Once or twice, I did it on both Friday and Saturday and it changed because of the implements that had come or gone between the two days. This year's was a little shorter than the past as the display area was a little light on variety (partly because it was a light year and partly because we started at 1 PM on Saturday and quite a bit had already been loaded out.
We had a few first timers in the crowd. I didn't get a chance to talk with them after we finished. I hope they found it worthwhile.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
hey guys need help again so dont laugh:) Attachment(s)
by johnnygo » Wed Sep 22, 2021 4:04 pm » in Farmall Cub - 9
- 659
-
by johnnygo
Tue Sep 28, 2021 4:16 pm
-
-
- 16
- 1073
-
by Don McCombs
Mon Aug 21, 2023 4:15 pm
-
- 3
- 323
-
by Matt Kirsch
Thu Jan 26, 2023 11:44 am
-
-
Do I have all of the right parts for my Cub implements? Attachment(s)
by Mrbill » Wed Nov 02, 2022 6:02 pm » in Farmall Cub - 8
- 388
-
by Mrbill
Tue Nov 08, 2022 7:39 pm
-
-
- 13
- 561
-
by Electronrider
Fri Jun 10, 2022 6:32 am
Who is online
Users browsing this forum: No registered users and 4 guests