Later tractors have a grease fitting on the torque tube for the clutch pedal. Has anybody added a fitting on an older tractor torque tube to lube the clutch pedal while it is all apart. Good idea?
Wm
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Adding a grease fitting for clutch pedal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 179
- Joined: Sun Jun 01, 2014 8:41 am
- Zip Code: 85233
- Tractors Owned: 47 Fcub
51 Fcub
57 Lo Boy FH
59 Lo Boy FH 45 Loader - Location: AZ,Gilbert
-
- 10+ Years
- Posts: 6179
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Adding a grease fitting for clutch pedal
Hi,
I have seen on here that guys have put the grease fitting on.
If you have a Cub apart to where it is easy to drill and tap a hole for the fitting, I'd say yes, it's worthwhile.
The Cubs without the fitting should be oiled at the top of the round part that fits against the housing, so the oil runs in and down into the clutch linkage.
Here is a pic from TM Tractor of the base of the clutch pedal, the shiny area needs lubing. It is inside the housing.
I have seen on here that guys have put the grease fitting on.
If you have a Cub apart to where it is easy to drill and tap a hole for the fitting, I'd say yes, it's worthwhile.
The Cubs without the fitting should be oiled at the top of the round part that fits against the housing, so the oil runs in and down into the clutch linkage.
Here is a pic from TM Tractor of the base of the clutch pedal, the shiny area needs lubing. It is inside the housing.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
What year was the grease fitting added on the torque tube for the clutch pedal
by wrz » Wed Dec 27, 2023 12:10 pm » in Farmall Cub - 4
- 911
-
by AL Farmall Boy
Mon Jan 08, 2024 10:14 pm
-
-
- 7
- 364
-
by Gary Dotson
Thu Jul 01, 2021 7:33 am
-
- 3
- 174
-
by Don McCombs
Sat Jul 23, 2022 4:52 pm
-
- 19
- 676
-
by Jim Becker
Wed Sep 22, 2021 10:16 pm
-
- 17
- 485
-
by Eugene
Sun Sep 11, 2022 7:41 pm
Who is online
Users browsing this forum: No registered users and 7 guests