I have the alternator hooked up for the 12V conversion. All I need to do is rest the wiring. Should I replace the Voltmeter with an Ammeter? If so what is the best way to pull the dash to do this?
EDIT: I just realized the D-O-C gauge is a ammeter so I think I just saved myself some work.
Also the tractor has the original wiring on it. I have the Ammeter hooked up to the grey cable and I'm going to run that back as it looks like it goes to the ignition, I'll just splice it together and skip the voltage regulator. The second cable that was hooked onto the generator do I need to use it for anything?
Thanks in advance.
How do you pull dash to replace gauge on 300 or should I?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 825
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
-
- Team Cub Guide
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: How do you pull dash to replace gauge on 300 or should I?
The one problem you may run into is the original ammeter only read either 30 or 30 amps maximum. The alternator will put out more than that if the battery is real low.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 5+ Years
- Posts: 825
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 1 guest