RARE 1964 Farmall Cub 12V non Hydraulic

[BSR]

I resonly aquarding this early 64 Farmall Cub 12v from a family who's father was a Cub collector. He bought it from the original owner in 1985, who was a collector also. It doesn't have hydraulics and never did. It's still has paint on the spark plugs from Factory. It's rare to see a Cub this late with no hyd. There where 303 made and bound for Canada but they didn't make it there. Just thought I share it with the group.

[Bob McCarty]

Nice find!!

[radioguy41]

[tst]

I like how it still has the hydraulics decal on the hood

[Eugene]

Early 64 Farmall Cub 12v. There where 303 made and bound for Canada but they didn't make it there.

Do you have a reference for the 303 tractors without hydraulics?

[BSR]

Not saying all 303 didn't have hyd, but this one doesn't.

[k hutchins]

No IH hand lift either.

The hand lift mechanism for that mower looks like it came with the mower. It looks like a Woods 59, but l don't remember mine coming with it's own hand lift.

[radioguy41]

Here's another with the hand lift. I've seen that same hand lift on Farmall A & B tractors. Probably a dealer option.

[Stanton]

I resonly aquarding this early 64 Farmall Cub 12v from a family who's father was a Cub collector. He bought it from the original owner in 1985, who was a collector also. It doesn't have hydraulics and never did. It's still has paint on the spark plugs from Factory. It's rare to see a Cub this late with no hyd. There where 303 made and bound for Canada but they didn't make it there. Just thought I share it with the group.

Awesome snag!
Sure is a very nice looking Cub!

[Gary Dotson]

My guess on the hand lift would be that it was offered, by Woods, for tractors without a factory implement lift.

[tst]

yes the hand lift was offered by woods for non hydraulic units

[BSR]

I Just Notice This,The Brake Pedals have minimal wear on them! I guess the family member was rite when he said he could only recall a hand full of times his father had it out in the 35 years that he owned it.

[Jim Becker]

The hole in the instrument panel for the speed control rod is still round. How do the teeth on the governor control quadrant look? I can see corks in the Touch-Control mounting holes in the bell housing.

[BSR]

This is an Early 64 12V, it's with in the 10th one made. Yes theres Cork with paint over it in the TC mounting holes, I havta look at the teeth that you mentioned.

[tst]

How far off is it from the #s on your restored 64