This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Woods 42 mower help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 17497
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Woods 42 mower help
You are correct.
-
- Cub Star
- Posts: 56
- Joined: Thu May 25, 2023 1:38 am
- Zip Code: 47515
Re: Woods 42 mower help
staninlowerAL wrote:There is some WOODS manuals located in the manuals section, Quick links tab at the upper left corner of this page. Scroll down to pdf manuals and browse the folders. Stan
It says 404 page not found
-
- 10+ Years
- Posts: 1431
- Joined: Fri Jan 25, 2008 9:02 am
- Zip Code: 00000
- Circle of Safety: Y
Re: Woods 42 mower help
Here is a link to the 42C-4 manual. Blades are part number 3975 or 3975KT for the pair.
https://farmallcub.com/rudi_cub/www.cle ... 0Mower.htm
https://farmallcub.com/rudi_cub/www.cle ... 0Mower.htm
-
- Cub Star
- Posts: 56
- Joined: Thu May 25, 2023 1:38 am
- Zip Code: 47515
Re: Woods 42 mower help
indy61 wrote:Here is a link to the 42C-4 manual. Blades are part number 3975 or 3975KT for the pair.
https://farmallcub.com/rudi_cub/www.cle ... 0Mower.htm
42c4.jpg
Thank you this helps
-
- Cub Star
- Posts: 56
- Joined: Thu May 25, 2023 1:38 am
- Zip Code: 47515
Re: Woods 42 mower help
Thanks everyone for the help
-
- Cub Star
- Posts: 56
- Joined: Thu May 25, 2023 1:38 am
- Zip Code: 47515
Re: Woods 42 mower help
tst wrote:if it has a clutch suspect its a C4 model, clutch needs to be oiled, the belt sheild also had the serial and model # on it, always thought that was dumb by woods, many toss the shield and the info with it
-
- Cub Star
- Posts: 56
- Joined: Thu May 25, 2023 1:38 am
- Zip Code: 47515
Re: Woods 42 mower help
Bone dry inside pulley
-
- 10+ Years
- Posts: 5218
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Woods 42 mower help
yes because people do not oil them, pricey to replace, think there is oil holes on the hub to do so, look at the manual for it
-
- Cub Star
- Posts: 56
- Joined: Thu May 25, 2023 1:38 am
- Zip Code: 47515
Re: Woods 42 mower help
I don't think the clutch disengages. Should it disengage by hand if you turn it the opposite way or does it take quite a bit.
-
- 10+ Years
- Posts: 6686
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Woods 42 mower help
It doesn't need a use grease...just perhaps a light swipe with some during reassembly, but instructions are for occasional oiling through the hole on top. If you over lubricate it, it is more apt to slip if you get into thick grass.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 169
-
by Gary Dotson
Tue Aug 01, 2023 7:35 am
-
- 4
- 298
-
by inairam
Thu Aug 05, 2021 8:23 am
-
- 10
- 325
-
by tst
Fri Aug 20, 2021 9:24 am
-
- 7
- 383
-
by Jim Reid
Thu Sep 16, 2021 3:51 pm
-
- 7
- 528
-
by Dale Finch
Sun Sep 05, 2021 12:18 pm
Who is online
Users browsing this forum: No registered users and 2 guests