This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Governor Rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 4
- Joined: Mon Mar 18, 2024 8:25 am
- Zip Code: 00000
Governor Rebuild
Can anyone point me in the direction for parts to rebuild my governor? When throttling up, the governer is not functioning properly. Thanks in advance.
-
- Team Cub
- Posts: 17280
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Governor Rebuild
TM (sponsor at the bottom of this page) has the parts you are likely to need.
What is the governor problem you are running into? A lot of symptoms can be cured without a full rebuild. It may only need some adjustments.
What is the governor problem you are running into? A lot of symptoms can be cured without a full rebuild. It may only need some adjustments.
-
- 10+ Years
- Posts: 6152
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Governor Rebuild
Hi,
Before removing the governor, check the throttle rod adjustment ahead of the carburetor. It has to be set right so the governor works right. The governor can work bad if the yoke on the rod is adjusted to the wrong place on the rod.
The LoBoy originally came with an IH carburetor, someone could have changed it to a Zenith, which were used on Cubs later.
I sent you a PM, you get to it at the top of the page.
Before removing the governor, check the throttle rod adjustment ahead of the carburetor. It has to be set right so the governor works right. The governor can work bad if the yoke on the rod is adjusted to the wrong place on the rod.
The LoBoy originally came with an IH carburetor, someone could have changed it to a Zenith, which were used on Cubs later.
I sent you a PM, you get to it at the top of the page.
-
- 5+ Years
- Posts: 2825
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Governor Rebuild
I agree with Glen. Very rarely is something wrong inside the governor. make sure all of the linkage from the throttle to the carb is free and adjust the linkage between the governor and the carb per the manual.
Do this before you decide it is the governor.
Do this before you decide it is the governor.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 304
-
by baldwindiesel
Mon Feb 21, 2022 5:09 pm
-
- 5
- 193
-
by Glen
Sat Sep 03, 2022 6:55 pm
-
- 2
- 221
-
by Bill V in Md
Tue Nov 01, 2022 3:37 pm
-
- 5
- 198
-
by Jon Dellabona
Fri Feb 16, 2024 3:17 pm
-
- 2
- 161
-
by k hutchins
Tue Jun 28, 2022 6:10 am
Who is online
Users browsing this forum: Cottonhead123, Cubfriend and 4 guests