Oil pump prime

[CBenedict1024]

Thanks for adding me!

I am getting grandpa's Cub running again. Serial number in the 53xxx range (if I remember correctly), with a J4 magneto. I've been watching YouTube, reading here, and purchased a book. I know to watch oil pressure when an engine starts. I'm close to starting it for the first time in a few years. I've heard the oil pumps can lose their prime. What is my procedure for avoiding that? I will be changing the oil anyway but have not yet.

I may not have access to all the maintenance stuff/links available here because I'm so new, so apologies if that is the case-I'm sure this topic is on here somewhere. I also didn't see a way to search posts. Site usage tips are welcome if that's where I'm falling flat. Thank you!

[Bill V in Md]

Check the bottom of the page on your post and you will see a list of similar topics. Just click on each one and you should see several good responses. I believe using the hole inside the oil filter housing is the easiest method.

[CBenedict1024]

I did find a great article, with pictures. I'm on it. Thank you!

[Glen]

I also didn't see a way to search posts.

Hi,
You can search for posts that have been made at the top of the page, to the right of the Farmall Cub.

[Crimson Tim]

Now that you have 2 posts, you should have access to the manuals under quick links at the top of the page, as well.