This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

magnet disassembly

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
paulp
10+ Years
10+ Years
Posts: 1
Joined: Sat Jul 28, 2007 9:51 pm

magnet disassembly

Postby paulp » Mon Jul 30, 2007 7:25 pm

Need to disassemble magneto. Cannot get the end opposite the points apart. Removed nut and washers, but can't get any further. What's the procedure?
Top
Donny M
10+ Years
10+ Years

Postby Donny M » Mon Jul 30, 2007 7:38 pm

A small 2 jaw puller works ok but a EJP puller is best. Maybe he can post a picture.
8)
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Mon Jul 30, 2007 7:44 pm

I did one a couple of weeks ago. I did use a small 2 jaw puller but also needed the aid of heat. There I used a heat gun. It took all the heat the gun could deliver and just when I was about to give up on the cool down it popped on its own. If you don't already know its on a taper shaft with a key. It could be a bugger.
Top

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 1 guest