This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Front tires
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 195
- Joined: Fri Nov 14, 2003 12:45 pm
- Location: Minnesota
Front tires
As I said in my tractor purchase post, I got a set of rear tires to go with the tractor. But how about fronts? I have seen a few different styles on cubs. What would be correct for the '55. And can any farm tractor place order them?
ALSO
I remember a long while back someone telling me that "in the old days" he used to mount his tractor tires himself. Is that true? can you mount a tractor tire (rear) by hand?
ALSO
I remember a long while back someone telling me that "in the old days" he used to mount his tractor tires himself. Is that true? can you mount a tractor tire (rear) by hand?
'55 Cub, (but always shopp'n!) '02 Kub, '57 Ford 640
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- 10+ Years
- Posts: 195
- Joined: Fri Nov 14, 2003 12:45 pm
- Location: Minnesota
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Shopp'n Cubs wrote:johnbron
How will you go about mounting then??
I will attempt to mount them myself. It should not be to much of a chore. If they give me too much of a hassle I will take them to the tire shop and let them do it. The ones that I have a hard time doing myself are the Tubeless ones trying to get them to seat but tubed is easy. I find the smaller the tire the harder to mount by hand, Like those (*&^%$#@#$%&) 4" rider mower tubeless`s.
Then came Bronson
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
I remember a long while back someone telling me that "in the old days" he used to mount his tractor tires himself. Is that true? can you mount a tractor tire (rear) by hand?
It isn't really that difficult to do. I've done my own tire work for years, but sometimes take one to the tire shop just to get the beads broken. That's the hardest part... especially if the rims have rusted badly. I'm 69 and disabled so I suppose I may quit doing it in 5 years or so. Just so you know, the larger the tire, the easier. I have a pair of 13.6 x 38's on an M that will have to have the tubes replaced. I don't expect any problems.
Those 4.00 x 12's are a job for little kids and old ladies because they are so flexible.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Though not necessary by any means, this helps make the job real easy"
$35 at Harbor Freight.
Like George, I've changed a lot of tires with only hand tools. Not a difficult job and probably the worst part is getting the tire bead "broken" from the rim. Especially if it's been on there for a few years. That's one of the features I really like about the changer. Any "tire irons" you use should have well rounded edges to prevent puncturing tubes or gouging the sealing surface of the bead.
Mama's liquid dish detergent makes sealing new beads on the rims really easy. I might even buy my own bottle (especially if she catches me with her's again).
$35 at Harbor Freight.
Like George, I've changed a lot of tires with only hand tools. Not a difficult job and probably the worst part is getting the tire bead "broken" from the rim. Especially if it's been on there for a few years. That's one of the features I really like about the changer. Any "tire irons" you use should have well rounded edges to prevent puncturing tubes or gouging the sealing surface of the bead.
Mama's liquid dish detergent makes sealing new beads on the rims really easy. I might even buy my own bottle (especially if she catches me with her's again).
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
I too have geared myself up to change my own tires. Purchased a wide variety of bead breakers and spoons and the manual changer Big Doogy showed pic of. The most useful tool however is the tube of tire lube I purchased at a local auto parts store. Came in a tub special order (lifetime supply for the house) butt I'm a little leary of dish soap. Had bad experience in the past with that stuff rusting metal real bad. This stuff is non-corrosive and real slippery for a while. The rubber absorbs it after installation and it won't corrode your rims. Makes installation 10xs easier. Also TireTek sells a solvent to aid in breaking beads that are stubborn. It slightly attacks the rubber compound just enough to allow the bead to give up on those rusted or just plain stubborn ones. Bill
-
- Cub Pro
- Posts: 876
- Joined: Mon Feb 03, 2003 5:05 pm
- Zip Code: 56374
- Circle of Safety: Y
- Location: MN, St. Joseph
When we changed the tire on the M, I just backed the H onto the the tire and rim. After doing this twice the came right off. Make sure the air is out of the tire though. Hopefully that is common sense, but I had better put in that disclaimer. We mounted two tires in about an hour. I have also hit an old tire with a sledge hammer and this also broke the bead.
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- 10+ Years
- Posts: 178
- Joined: Mon Mar 03, 2003 7:46 pm
- Location: Charleston, WV
I just picked up some tires today for the 54. I had told my dealer about Tucker, by the way Jim at Tucker is a great guy to deal with, and the $60.10 sounds about right. She sold me two tires and tubes for $65. As much as I like a great deal, for 5 bucks I'd rather support my dealer. I plan on mounting them myself, I do all my cub cadet tires by hand although that handy gadget from Harbor is lookin better all the time.
I use a brick hammer to break the bead on small tires (can't be new and sharp or it will damage the rubber) a little water helps it get through the bead. I was wondering about the 24's, I don't have any old tire hammers from my trucking days (thankfully).
BTW, is Tuckers price for the rear tires good? I've never had to buy them before.
I use a brick hammer to break the bead on small tires (can't be new and sharp or it will damage the rubber) a little water helps it get through the bead. I was wondering about the 24's, I don't have any old tire hammers from my trucking days (thankfully).
BTW, is Tuckers price for the rear tires good? I've never had to buy them before.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Scott C wrote: I do all my cub cadet tires by hand although that handy gadget from Harbor is lookin better all the time.
I don't think the one Big Dog showed will work very well on lawn tractor tires, but they do sell one for about $20 that does do a fairly good job on them, also works great on the golf cart that I use to run around the place, though I would suggest going to your local auto parts store and getting a couple of small tire spoons to go with it. Most auto parts store also sell Rubber Lube at a reasonable price.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
-
- 10+ Years
- Posts: 908
- Joined: Sat Feb 15, 2003 7:20 am
- Zip Code: 00000
Someone had a post on breaking beads with a “C†clamp last summer. At the time I was changing a set of tires on a friends Cub and couldn’t break them down the conventional way and tried the “C†clamp way. The rear tire(s) bead broke down as soon as the clamp was turned in. I couldn’t believe what I was seeing. The front tires were removed by my tire machine.
I just did some Cub Cadet tires and they were a little more stubborn with the “Câ€clamp method because, their rims are pretty wide.
Jack Fowler
I just did some Cub Cadet tires and they were a little more stubborn with the “Câ€clamp method because, their rims are pretty wide.
Jack Fowler
-
- 10+ Years
- Posts: 122
- Joined: Sun Feb 02, 2003 7:41 pm
- Location: Pa. Kemblesville
johnbron wrote::P I use the outrigger on my backhoe for down pressure on the tire with a 2X4 next to the rim. I tried with the loader bucket but it just raises the front of the tractor off the ground on tough stuck beads.
johnbron, Now I can convince my wife that I really need that backhoe I've been wanting. I have to have it to break the beads on the cub tires
Catfish
-
- Similar Topics
- Replies
- Views
- Last post
-
- 16
- 306
-
by cdahl383
Wed May 03, 2023 4:04 pm
-
- 15
- 519
-
by Glen
Mon Nov 08, 2021 6:55 pm
-
- 21
- 539
-
by Greenthumbfarms
Thu Jul 21, 2022 10:03 pm
-
- 6
- 361
-
by Plumberspieco
Sat Sep 10, 2022 2:10 am
-
- 11
- 398
-
by Stanton
Wed Oct 20, 2021 1:30 pm
Who is online
Users browsing this forum: No registered users and 4 guests