C-2 Mower For Sale

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

C-2 Mower For Sale

Postby Rick ('50, NC) » Thu Jan 15, 2004 12:11 pm

Have an IH C-2 mower for sale that is currently on my '50 cub.

- Deck is solid. Entire unit (less spindle) was sandblasted, primed with IH red oxide primer and painted with IH 2150 to match tractor.

- Mower skirts are complete and have been straightened at machine shop.

- Mounting angle brackets were straightened at machine shop. New pressed-in pivot bushings installed.

- Belt and blades are 1 season old. Used only in pasture.

- Spindle (Danuser) has no play and appears to be in good shape.

- New over-running clutch pin springs.

- PTO pulley, pulley hub, lift arm and chain included.

- Side skids were fabricated in machine shop because I didn't know that you could still buy them.

Selling because I have more mowers than I can use. Will get more use out of my Cub with 3-point hitch than with mower.

Selling price: $400.00 - you pick up.
My worst day on a Cub is better than my best day at the office!
Rick ('50, NC)
10+ Years
10+ Years
Posts: 74
Joined: Wed Apr 02, 2003 10:40 am
Location: NC, Autryville

Return to Farmall Cub

Who is online

Users browsing this forum: No registered users and 7 guests