This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Anybody ever taken a distributor apart.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Anybody ever taken a distributor apart.
My distributor was soaked with oil up where the points are at when I tore my engine down. Now that I am reassembling, I have taken it apart and cleaned it up. It is pretty straight forward. The distributor shaft has a pretty good groove in it where the seal rides. The seal on this is an o-ring in a little brass carrier instead of a lip seal. Will a new o-ring seal in this groove? If not what are my options. I imagine a new shaft would be pricey, IF you could even get one. I don't think there is room (lengthwise) for a speedy-sleeve. Any suggestions?
The four most expensive words in tractor restoration: "We might as well..."
-
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
-
- 10+ Years
- Posts: 1055
- Joined: Thu Feb 06, 2003 9:21 am
- Zip Code: 93510
- Location: Acton Ca.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 194
-
by radioguy41
Sat Jul 01, 2023 7:21 am
-
- 11
- 490
-
by JoeB
Wed Feb 23, 2022 5:23 pm
-
- 4
- 226
-
by Gary Dotson
Tue Aug 17, 2021 6:53 am
-
- 4
- 243
-
by Cubbuilder
Thu Feb 17, 2022 9:20 am
-
-
Magneto ignition no spark through distributor cap
by Dave Downs » Sat Sep 24, 2022 8:54 am » in Farmall Cub - 3
- 307
-
by Gary Dotson
Sun Sep 25, 2022 6:56 am
-
Who is online
Users browsing this forum: No registered users and 3 guests