Here is a couple of pics showing some of the good uses a Cub can be put to.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall Cub w/3pt Spreader
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 74
- Joined: Wed Apr 02, 2003 10:40 am
- Location: NC, Autryville
-
- 10+ Years
The right hand leg now picks up 2 holes instead of 1 and the sway bars are 3/8" material. The others bent under heavy side loads. So after several straightenings I decided it was time to change to heavier stock. Basically I think the way to avoid breaking something is to spread the stress out over as many bolt holes as possible in the design. The castings must be pretty darn strong as I have put them to the test quite a few times. I'm going to take pictures of all the 3pt pieces individually this week and post them. Bill
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 218
-
by Cubfriend
Sat Sep 17, 2022 9:02 pm
-
- 3
- 180
-
by Barnyard
Thu Jun 22, 2023 9:12 pm
-
- 2
- 110
-
by staninlowerAL
Thu Jun 22, 2023 7:15 pm
-
-
100 Manure Spreader Question Attachment(s)
by jasondepinto » Mon Nov 08, 2021 8:25 am » in Farmall Cub - 29
- 705
-
by Dusty B
Mon Nov 15, 2021 9:43 pm
-
-
-
A 100 manure spreader hopped onto the trailer Attachment(s)
by 1541 » Thu Jan 26, 2023 1:19 pm » in Farmall Cub - 13
- 351
-
by Magnum
Fri Jan 27, 2023 10:38 pm
-
Who is online
Users browsing this forum: No registered users and 9 guests