Grader Blade Finished

[Yogie]

You mean I can have a blade and a side mower mounted at the same time
I gota look into this

[geibes]

You mean I can have a blade and a side mower mounted at the same time
I gota look into this

Interesting. I know a C-2 belly mower and 54A blade can't be installed at the same time.

[Jerry M]

Yeah, only thing is, only one can be hooked to the front rock shaft at the time. The other one has to be tied off .

[PageRob]

Yeah, that ol potato planter has a couple of bad places on the wheels. Best I can gather from online info, it's a pre 1927 model.

Despite the bad spots, that's a pretty neat looking device!

[Jim Becker]

Yeah, only thing is, only one can be hooked to the front rock shaft at the time. The other one has to be tied off .

What do you do at the front implement socket?

[Jerry M]

Jim, I haven't had chance to do it yet. But, my plan is to replace a bolt in the axle hanger for the grader blade with an eyebolt to fasten the anti-sway bar for the sickle mower to. Because of the fact that the anti-sway bar won't be running over to the oppisite of the socket it will be necessary to make it adjustable because it will need to be different lengths depending on whether the sickle mower is in the up or down position. therefore, it will need to be made like the pressure spring rod for the front cultivator tool bars. Minus the spring of coarse, instead just use a T-handle locking bolt that can can be tightened or loosened without the use of tools.
does any of this make since ?

Jerry

[John *.?-!.* cub owner]

Jerry, that bolt has to be a minimum of grade 5, or it will bend from the weight of the blade, and then it can be heck to get out, depending on which end the nut is on. I learned the hard way.