I noticed a leak coming from my hydraulics and found that it was coming from the control valve dust boot. I took the unit off the cub and opened it up. It seems that I probably need a new O-ring on the steel control rod. I figure since I have the whole thing apart, I mine as well rebuild everything. Has anyone had any experience here? Can I buy a rebuild kit with all the seals/ O-rings in it? Where can I buy a kit?
Thanks for the help guys!
-Eric
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydraulic Rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 53
- Joined: Sun Dec 21, 2003 9:18 pm
- Location: Farmington, CT
-
- 10+ Years
- Posts: 167
- Joined: Mon Feb 03, 2003 2:24 pm
- Location: Pima, Az.
-
- 10+ Years
- Posts: 53
- Joined: Sun Dec 21, 2003 9:18 pm
- Location: Farmington, CT
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 211
-
by Magnum
Thu May 27, 2021 9:24 pm
-
- 2
- 180
-
by Glen
Sun Sep 04, 2022 5:18 pm
-
- 6
- 446
-
by ricky racer
Thu Dec 07, 2023 7:38 pm
-
- 5
- 624
-
by inairam
Thu Aug 24, 2023 6:07 am
-
- 3
- 258
-
by Glen
Sun Sep 19, 2021 8:00 pm
Who is online
Users browsing this forum: No registered users and 1 guest