Howdy, It's me again.
I have written several times about my cub I purchased. I finally got it home two weeks ago. The weather has been bad and my job gets in my way, today I took my cub to my farm place and took the mower off so I could look at the tractor more closely. There is a homemade bracket that held mower pullys and the drawbar.Question : the drawbar is 10 inches to floor.It looks to me that there is mounting holes that would accomodate the drawbar,if so the drawbar would be 17inches from floor. What is the height of drawbar when fastened to original mounting holes?The serial number plate was painted over and I bought some paint remover on my way home and got the paint off. The plate appears to have been sand blasted , the texture was rough. I could read the stamped numbers 97744 and below them is the number 1800. That's all that is visible. I'm still not sure of what year it is yet. It has the underslung exhaust and no hole in hood for upright. I looked at it really close and can't tell if parts were replaced. It has ,what I have found, the short wraparound instrument panel. It has one empty hole at bottom and I don;t know what went there ,but I want one.
For some reason knowing the year is really important to me even though many year model parts interchange. I have seen the terms ' high boy' 'low boy' , what determines this? I measured 22 inches from bottom of oil pan to floor , does that help in determining an answer?
Have I asked too many questions yet?
I put a new battery on it (6 volt) and there were some sparks when I connected the Positive cable. I do know it is pos. grnd.
I am about to take some pictures to share. Is there any particular shot that would help us to date this tractor? I will send pics. to anyone that wants to help me.
I need a carb. kit ASAP. where do I order from?
Thanks for you time and considerations.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
I'm back again....still need help...
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 14
- Joined: Mon Jan 19, 2004 3:44 pm
- Location: Breckenridge,Texas
I'm back again....still need help...
I purchased a '49 Cub , I need lots of info. and manuals. Owen orjb@texasisp.com
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
97944 would be the serial number, which would make it a late 1949 model (same year as the one cub-bud is fixing up for me. The 1800 is the maximum no load rpm. If you will go to the new mmbers read this at the top of the forum, it has links to a good cub faq, as well as pictures.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Back to work for the old gal!! Attachment(s)
by Dale Finch » Sun Sep 26, 2021 11:52 am » in Farmall Cub - 15
- 565
-
by k hutchins
Sat Oct 02, 2021 7:46 pm
-
-
-
Back in the Cub business--kinda. Attachment(s)
by Super A » Mon May 16, 2022 8:44 am » in Farmall Cub - 5
- 291
-
by SamsFarm
Mon May 16, 2022 7:15 pm
-
-
-
Cub dies starts right back up. Attachment(s)
by Rusty red » Wed Aug 25, 2021 8:38 pm » in Farmall Cub - 6
- 277
-
by SONNY
Thu Aug 26, 2021 6:57 pm
-
-
- 7
- 382
-
by Cubfriend
Tue Nov 07, 2023 11:40 pm
-
-
Farmall Cub - Only One Back Wheel Engaged
by Tom CA Cub '49 » Mon Mar 27, 2023 10:33 am » in Farmall Cub - 8
- 294
-
by Magnum
Wed Mar 29, 2023 12:57 pm
-
Who is online
Users browsing this forum: No registered users and 6 guests