Well as y'all know i traded Josh the rusty ol demo for a parts cub.
Here is what it looked like at 11 AM....................................
ANd i ptu a dist on ti and got it running But As Josh had thought the engine was verry weak.
si i decided to knock it in the head Hang it on the crane skin it and let it Bleed out..........
Here is what it looked like at 2 PM
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Another one bites the Dust
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
Another one bites the Dust
Shoot low Sherriff they are Riding Shadows
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
-
- Team Cub
- Posts: 24279
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Another one bites the Dust
That top photo looks a lot like some of the Cubs sittin' around BOB. I better go take an inventory. Flash and Bandit might have let one slip out the gate. I know it ain't Suzy "Q"! Her exhaust wasn't cut that straight!
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 1841
- Joined: Sat Nov 06, 2004 2:28 pm
- Zip Code: 43130
- eBay ID: evilboweviel
- Location: OH, Lancaster
Re: Another one bites the Dust
That one is in better shape than some of the ones in "BOB"
Ron
Ron
-
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
Re: Another one bites the Dust
Looks nice and sunny Ralph.Rain and crappy here again today.OH WELL!!!!I need to fix a few things anyway.kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
- 10+ Years
- Posts: 21
- Joined: Tue Apr 15, 2008 5:22 am
- Location: waikato New Zealand
Re: Another one bites the Dust
damm it looks alot better than my one iam restoring but oh well we have to start somewhere i guess
-
- 10+ Years
Re: Another one bites the Dust
Yeah it was kind of a tough decision to make but either way I have a cub. It was rougher than the one I traded. I would have never trade3d if the serial #'s hadnt been so close. But I had to have it since it was right there next to the other demo. That cub I traded was one that was in the package deal when I bought the other cubs. The deal was done more than right between Ralph and I as it has always has been. I sure owe Ralph lots for all he has done for me.- It all come down to me wanting that Demo very badly so I got it. I really aint into the white ones that much but had to have the previous demos Older brother.
THANKS RALPH FOR ALL YOU DID
THANKS RALPH FOR ALL YOU DID
-
- 10+ Years
- Posts: 174
- Joined: Wed Sep 12, 2007 11:36 pm
- Zip Code: 38487
- eBay ID: liverider
- Location: Williamsport, TN
Re: Another one bites the Dust
RALPH,
WHAT ARE YOU GOING TO DO WITH THE FINALS? i HAVE ONE WITH A WALLERED OUT HOLE IN THE REAR AND CAN'T MOUNT MY DRAW BAR. I AM INTERESTED IN THE WHOLE FINAL ASSEMBLY IF YOU ARE SELLING THEM.
WHAT ARE YOU GOING TO DO WITH THE FINALS? i HAVE ONE WITH A WALLERED OUT HOLE IN THE REAR AND CAN'T MOUNT MY DRAW BAR. I AM INTERESTED IN THE WHOLE FINAL ASSEMBLY IF YOU ARE SELLING THEM.
R,
"Phil D"
1951 Cub, L-54 grader blade, 144 Cultivators, 193 Mold Board Plow, 23-A Disc Harrows, 1951 Farmall "H", 2010 Farmall 35, 1951 John Deere B, 1956 John Deere 70.
"Phil D"
1951 Cub, L-54 grader blade, 144 Cultivators, 193 Mold Board Plow, 23-A Disc Harrows, 1951 Farmall "H", 2010 Farmall 35, 1951 John Deere B, 1956 John Deere 70.
-
- 10+ Years
- Posts: 114
- Joined: Mon Oct 22, 2007 3:07 pm
- Zip Code: 08527
- Location: NJ,Jackson
Re: Another one bites the Dust
Ralph,
Why did you part out that Cub?? You could have sold it to Wisconsin Cubman He would have enough parts that he
would have to be able to get his video cable off of Merlin Make one out of two.
Why did you part out that Cub?? You could have sold it to Wisconsin Cubman He would have enough parts that he
would have to be able to get his video cable off of Merlin Make one out of two.
1966 Cub
54a Blade
Pennington Mower
54a Blade
Pennington Mower
-
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
Re: Another one bites the Dust
John B. wrote:Ralph,
Why did you part out that Cub?? You could have sold it to Wisconsin Cubman He would have enough parts that he
would have to be able to get his video cable off of Merlin Make one out of two.
One Franken-merlin-ralph-davidbennett-donny-special cub is enough for me!! I do admit that when I look at a cub that is destined for parts, I do get my shopping list together...it is a matter of money and time... that's all it is...
I will be working at posting video and pics over the next couple of days. Everything is burned down to a CD now, so I am in the home stretch!
Mike in La Crosse, WI
Who is online
Users browsing this forum: raystractors and 7 guests