Almost finished putting the engine back together on 49-1. I was looking at the oil pump gasket I bought. IT'S A PIECE OF PAPER!!! It's only .004" thick.
Is this the correct gasket
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Oil Pump Gasket??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
-
- 10+ Years
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
HEY Donny
I just went down the shop and I have a wix filter here I am almost positive I bougth for my 61 cub and the gasket is rubber and .035 thick wix part #51153 My memory is not the greatest, but I think I am correct on this info double check what I said. Got it at local auto parts, he carries wix filters.Is there a cross referance chart on here, I think so. Paul K in N.H.
I just went down the shop and I have a wix filter here I am almost positive I bougth for my 61 cub and the gasket is rubber and .035 thick wix part #51153 My memory is not the greatest, but I think I am correct on this info double check what I said. Got it at local auto parts, he carries wix filters.Is there a cross referance chart on here, I think so. Paul K in N.H.
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
-
- 10+ Years
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
-
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Yes, like Daniel H said, the thickness of the gasket determines the end play of the pump gears. If thick gasket material was used, the end play would be subject to variation from how much the material compressed.
Gasket sets for some engines have 2 oil pump gaskets so you can select the one that provides the better fit.
Gasket sets for some engines have 2 oil pump gaskets so you can select the one that provides the better fit.
-
- 10+ Years
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12
- 408
-
by goxu1
Tue Jul 11, 2023 5:36 am
-
- 2
- 95
-
by Don McCombs
Tue Apr 09, 2024 9:58 am
-
- 7
- 465
-
by Clemsonfor
Mon Sep 13, 2021 4:57 pm
-
- 6
- 268
-
by Gary Dotson
Thu Sep 08, 2022 7:33 am
-
- 4
- 253
-
by pett3227b
Wed Nov 01, 2023 12:36 pm
Who is online
Users browsing this forum: No registered users and 4 guests