This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Steering worm wheel shaft question.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
Steering worm wheel shaft question.
This question is regarding the steering worm wheel shaft and it's upper and lower bushing. Continuing with the 49 rebuild, I measured the shaft and the bushings. The bushings are .005 to .006 larger than the shaft. Is this too much wear? Mr. Updike says he can get the lower bushing but not the upper one. Will this give extra slop to the steering? If these need to be replaced, where would one look for an upper one. Thanks guys.
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
-
- 10+ Years
- Posts: 167
- Joined: Mon Feb 03, 2003 2:24 pm
- Location: Pima, Az.
-
- 10+ Years
- Posts: 108
- Joined: Tue Nov 04, 2003 7:49 am
- Location: Milton, Florida
I bought the upper bushing from my Case-New Holland dealer about two weeks ago. I'm not certain about the wear tolerance; Rudi has the Blue Ribbon Service Manual on-line (this site) and it lists all of the tolerances. The old one was a pain to remove. The bushing is split on one side, so you would think it would be easy to collapse, but it was still tough.
-
- 10+ Years
- Posts: 167
- Joined: Mon Feb 03, 2003 2:24 pm
- Location: Pima, Az.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 217
-
by Lomiller
Sat Jul 08, 2023 8:34 pm
-
- 3
- 368
-
by Glen
Tue Mar 22, 2022 10:10 pm
-
-
Steering rod removal from worm gear. Attachment(s)
by Tractor Rod » Wed Dec 15, 2021 10:42 pm » in Farmall Cub - 3
- 290
-
by Tractor Rod
Thu Dec 16, 2021 6:21 am
-
-
- 3
- 150
-
by tst
Wed Aug 31, 2022 10:12 pm
-
- 6
- 371
-
by Pap
Sun Sep 26, 2021 7:57 pm
Who is online
Users browsing this forum: No registered users and 3 guests