This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch control question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 145
- Joined: Mon Feb 02, 2004 7:05 pm
- Location: Brookfield Nova Scotia
Touch control question
I had my touch control out and took it all apart and cleaned it well. Put a new rebuild kit and large screen into it. Put 4 pints into it pumped it quickly 10 or 12 times to purge air out of it. and nothing. Ther is lots of presure when I take out one of the little allen screws where the steel lines go onto the touch control. Any ideas what the problem could be?
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Question on touch control arms Attachment(s)
by Workinprogress » Sat Feb 19, 2022 10:25 pm » in Farmall Cub - 4
- 285
-
by SamsFarm
Sun Feb 20, 2022 7:12 pm
-
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 234
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 4
- 269
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
- 5
- 1068
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
- 6
- 362
-
by tinnerjohn
Wed Oct 06, 2021 11:43 am
Who is online
Users browsing this forum: No registered users and 4 guests