I've been searching thru past posts and can't seem to find the dimensions to make the alternate drawbar. I'll just go buy the steel and weld my own, but want to get right lengths. Also, what thickness do you use?
How about hole patterns? What we do is put a few layers of duct tape on the piece, and hammer it against the holes in the casting. The holes then make an indent on the duct tape. But if someone has an easier way or a pattern, let me know.
I got to use my blade yesterday - messing around in the driveway. You may remember its a belly mount, and even I was impressed with how the driveway turned out. The neighbors thought I would end up with washboards, but it is perfectly smooth!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Alternate drawbar dimensions
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 41
- Joined: Tue May 25, 2004 6:35 am
- Location: Iowa
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
mymariah:
K, the dimensions are on the Cub Manual Server. And can be found under the link Parts and Implement Sketches and then under Cub 54A Blade.
Here is the link:
Alternate or Substitute Drawbar.
There is lots of stuff on the server, if it is raining as it is here and you have some spare time, have a read - peruse the whole server. All of our Cub friends have been graciously sending me material for over the last year to post for all to use
K, the dimensions are on the Cub Manual Server. And can be found under the link Parts and Implement Sketches and then under Cub 54A Blade.
Here is the link:
Alternate or Substitute Drawbar.
There is lots of stuff on the server, if it is raining as it is here and you have some spare time, have a read - peruse the whole server. All of our Cub friends have been graciously sending me material for over the last year to post for all to use
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 41
- Joined: Tue May 25, 2004 6:35 am
- Location: Iowa
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 251
-
by CharlieK
Sat Dec 24, 2022 4:47 pm
-
- 1
- 165
-
by Bill V in Md
Thu Dec 01, 2022 7:19 pm
-
- 0
- 93
-
by goxu1
Sat May 07, 2022 6:10 am
-
-
Cub-22 Pitman bearing assembly Dimensions Attachment(s)
by Bennydh » Thu Mar 16, 2023 5:33 pm » in Farmall Cub - 7
- 307
-
by Bennydh
Sun Mar 19, 2023 10:24 am
-
-
-
Delco 10si mounting bracket dimensions/diagram? Attachment(s)
by Grandfatherjim » Thu Mar 23, 2023 8:04 am » in Farmall Cub - 5
- 223
-
by DBIZZELL
Fri Mar 24, 2023 7:01 am
-
Who is online
Users browsing this forum: Dale Finch and 6 guests