carburator float problems

Tue Jun 08, 2004 12:16 pm

I need a float for a 53 cub. I already went to case and they have an updated carb for it, but I would like to keep it original. Also there used to be a website that sold the floats wegner or something like that.

Tue Jun 08, 2004 12:21 pm

If you have the old float, small holes can usually be soldered, if the float is in decent shape.

Tue Jun 08, 2004 12:21 pm

Hi

http://www.jptractorsalvage.com or tmtractorparts.com

Tue Jun 08, 2004 7:42 pm

ChickenWing wrote:If you have the old float, small holes can usually be soldered, if the float is in decent shape.


True,, but make sure you get all the gas out of the float first, other-wise you have a flaming projectile!! :shock: Ask me how I know. :roll: :lol:

carburetor float problems

Tue Jun 08, 2004 9:09 pm

check with your IH dealer- I just bought a brand new replacement float for a '60 CUB IH carburetor in Maryland from the dealer. about 20 bucks i think. BTW , the dealer is Hugh C. Gardiner,in White Plains Md. Good folks to deal with.