This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
frozen cylinder heads
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 11
- Joined: Sun Sep 28, 2003 7:51 am
frozen cylinder heads
I have a 1953 Cub and it appears the heads are frozen. I have tried Mystery oil and liquid torch, but will not move. I have pulled starter off and tried to move fly wheel and tried a cranking bar, but no luck. Before I go pulling the head, any othe reccomendations? It has been 1.5 years since last started and has been stored outside with cover and cover over the exhaust. Antifreeze level seems fine.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
I think I would go ahead and pull the head. Anything stuck that hard, I want to see the inside.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 194
- Joined: Thu Jul 10, 2003 6:25 pm
- Location: Boston, NY 14025
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Richard, by heads frozen, I assume you mean the pistons, and you can't turn it over. As Bigdig said, I'd pull the head for a good look inside. Your problem may be a vlave stuck rather than a piston stuck. Use a small prybar through the starter hole and see if you can turn the engien backwards a little. If you can it probably is a stuck valve.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 116
-
by DBIZZELL
Sun Oct 03, 2021 6:20 pm
-
- 15
- 718
-
by tgrist
Sun Jan 28, 2024 9:41 am
-
- 6
- 268
-
by Dale Finch
Fri Apr 30, 2021 10:33 pm
-
-
Cracked cylinder head leaking coolant Attachment(s)
by BJM68 » Sat May 01, 2021 3:55 pm » in Farmall Cub - 5
- 329
-
by BJM68
Sun May 02, 2021 11:49 am
-
-
-
Replacing bottom gasket on touch control cylinder block Attachment(s)
by Gene Rogers » Mon Feb 07, 2022 11:35 am » in Farmall Cub - 5
- 338
-
by Ken (48 Cub)
Tue Feb 08, 2022 9:14 am
-
Who is online
Users browsing this forum: No registered users and 10 guests