I just saw this idea on the Red Power discussion forum. It was posted by the King-of-Obsolete. He uses it to free stuck crawler engines in Canada where he does winter freighting. While it would cost an old starter, it looks like it should work on many tractors, not just the TD-6 crawler he was using it on. I assume the drive is welded solid. KOO calls it a Bar Starter. Many of his "Cat Train" stories are very interesting.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Freeing stuck engine
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Freeing stuck engine
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
I saw this too. Looks like a pretty good idea. You probably have a lot better contact on the ring gear than when using a pry bar, a lot more leverage too.
One thing about using this approach on other engines is that the larger engine's starters have a middle bearing in the starter (shows in this picture). Without the middle bearing, building one of these is a little trickier.
If the engine starts you would have to be real fast removing the starter.
One thing about using this approach on other engines is that the larger engine's starters have a middle bearing in the starter (shows in this picture). Without the middle bearing, building one of these is a little trickier.
If the engine starts you would have to be real fast removing the starter.
-
- 10+ Years
- Posts: 568
- Joined: Sun Aug 10, 2003 3:39 pm
- Location: Wellsville NY
To build one of these for a cub is easy if you have a old starter & grinder & welder.
Cut the armiture off at the end of the windings.
Weld a piece of good steel rod to it the same size as the rear bushing.
Cut just the very end of th rear bushing cover off .
put the starter back to gether with rod sticking out the back of the starter.
Weld what ever size nut on that you like.
Built one of these.
I use it to roll the eng. over when in frame rebuilding.
I have used ti to help in freeing up a stuck eng. on a 62 cub low boy.
You just have to becarful as you can damage the ring gear.
Cut the armiture off at the end of the windings.
Weld a piece of good steel rod to it the same size as the rear bushing.
Cut just the very end of th rear bushing cover off .
put the starter back to gether with rod sticking out the back of the starter.
Weld what ever size nut on that you like.
Built one of these.
I use it to roll the eng. over when in frame rebuilding.
I have used ti to help in freeing up a stuck eng. on a 62 cub low boy.
You just have to becarful as you can damage the ring gear.
If it's been broken I did it.
If its not broken wait till I touch it.
If its not broken wait till I touch it.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 568
- Joined: Sun Aug 10, 2003 3:39 pm
- Location: Wellsville NY
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Dale:
Pics, sketch, narrative, measurements?? If you can send raw data and pics, can put into powerpoint and post if you agree????
Sounds like a real good gizmo - specially since Jethro is still stuck....
Pics, sketch, narrative, measurements?? If you can send raw data and pics, can put into powerpoint and post if you agree????
Sounds like a real good gizmo - specially since Jethro is still stuck....
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 198
-
by NJ Farmer
Sat May 14, 2022 1:35 pm
-
- 7
- 468
-
by waynemo
Wed Jul 06, 2022 12:06 pm
-
- 2
- 267
-
by NJ Farmer
Tue Jun 01, 2021 12:32 pm
-
- 1
- 105
-
by staninlowerAL
Wed Aug 10, 2022 4:51 pm
-
- 7
- 422
-
by MontanaMan
Tue Feb 21, 2023 7:14 pm
Who is online
Users browsing this forum: No registered users and 5 guests