When putting the battery hot (-) wire to "A"/Gen. terminal post on generator, and having the "F" field terminal grounded to gen. case, the generator should turn, proving that the generator is working.
My question is this.....How fast should it turn?
Yes, the generator turns, but the RMPs are very slow. Is this correct?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Generator Test/Is This Right?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Most of the times I have done this, the generator motors over fairly slowly. It depends on how good the connections are and the size of the conductors, charge of the battery etc. It's not going to spin like a starter motor.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
Thanks Bigdog,
I never have done this check.
My generator RPMs were slow, thats why I asked the question.
After getting no charge from the generator, I cleaned the commutator and redid the wires contections and got some turnover, but didn't know if the generator should spin super fast or turtle slow.
Thanks
I never have done this check.
My generator RPMs were slow, thats why I asked the question.
After getting no charge from the generator, I cleaned the commutator and redid the wires contections and got some turnover, but didn't know if the generator should spin super fast or turtle slow.
Thanks
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 329
-
by John *.?-!.* cub owner
Thu Jun 09, 2022 10:36 pm
-
- 4
- 142
-
by Leewebb7
Tue Mar 19, 2024 11:29 am
-
- 1
- 159
-
by Jim Becker
Thu Feb 15, 2024 7:29 pm
-
-
Magneto Trouble How to Test and What is next? Attachment(s)
by buddylindsey » Tue Mar 19, 2024 10:17 pm » in Farmall Cub - 8
- 327
-
by buddylindsey
Sun Mar 31, 2024 7:48 pm
-
-
- 7
- 260
-
by elongest
Mon Feb 27, 2023 10:16 pm
Who is online
Users browsing this forum: No registered users and 6 guests